For contractors, a crane that can handle multiple jobs without a lengthy setup can be a major advantage. Tadano’s new AC 3.060-2 is designed with that idea in mind, combining the mobility of a taxi crane with the lifting capacity needed for a wide range of construction work.

The 3-axle all-terrain crane is built to move from one job to another with minimal preparation and can be used for applications ranging from concrete work and unloading to hall construction and prefabricated housing.

Tadano says the crane also sets benchmarks in its class for line pull and clearance height.

“With our new AC 3.060-2, we have created a compact and powerful crane that can cover an extremely wide range of applications without much effort,” said Masafumi Nakamura of Tadano’s Product Development Division in Japan.

Built for Tight Spaces and Challenging Lifts

One of the crane’s biggest strengths is its performance when the boom is positioned at a steep angle.

With its 50-meter (164-foot) main boom fully extended and 13 tonnes (28,700 pounds) of counterweight, the AC 3.060-2 can lift 5.8 tonnes (12,800 pounds) at an 18-meter (59-foot) working radius.

The crane can also be equipped with a 16-meter (52.5-foot) extension angled at 20 degrees. With the main boom fully extended, it can lift 2.3 tonnes (3,500 pounds) at a 28-meter (92-foot) radius, according to Tadano.

The system can reach a maximum length of 69 meters (226 feet), giving operators additional reach when loads need to clear buildings or other obstacles.

That could make the crane particularly useful for jobs such as placing air conditioning equipment on rooftops or moving machinery in areas where there isn't much room to work.

Less Reeving Can Mean Faster Setup

The AC 3.060-2 also puts a strong emphasis on line pull.

Tadano lists a single-line pull of 6.7 tonnes (15,040 pounds), which it says is best in class. With triple reeving on the single-sheave hook block, the rope can handle up to 20 tonnes (44,100 pounds).

For crews, the benefit isn't just lifting power. Strong line pull can reduce the amount of reeving required for certain jobs, helping operators spend less time preparing the crane before a lift.

That fits with the crane's role as a taxi crane, where getting from one job to the next and setting up quickly can be just as important as maximum lifting capacity.

Ready For the Road

The AC 3.060-2 is designed to travel between jobs without requiring additional transport in many situations.

In its road configuration, the crane can operate within a 12-tonne (26,500-pound) axle load limit. It can travel with 4.2 tonnes (9,300 pounds) of counterweight, a single-sheave hook block and a 300-kilogram (660-pound) payload.

The crane also uses a 6 x 6 x 6 drivetrain and 16-inch tires.

A turning assistant is available to help the driver maintain visibility and awareness while traveling, adding another safety feature to the road-going configuration.

A Low Profile for Confined Jobsites

Once it reaches the jobsite, the crane's compact dimensions become another advantage.

The AC 3.060-2 has a clearance height of just 3.71 meters (12 feet, 4 inches), which Tadano says is the lowest in its class. Its 2.55-meter (8-foot, 4-inch) width and 9.49-meter (31-foot, 2-inch) carrier length also make it suited to tighter work areas.

That could be especially useful inside industrial buildings, warehouses and other locations where overhead clearance is limited.

Operators can also use Tadano's optional Surround View system, which uses four cameras to help with positioning. The crane's Flex Base system allows the outriggers to be extended to different lengths depending on the space available.

The IC-1 Plus crane control system with capacity radar is designed to account for different outrigger configurations and maximize the crane's available lifting capacity.

Another feature is the boom's underfloor positioning, which Tadano says helps make reeving and extension setup safer and easier.

One Crane, Multiple Applications

Tadano is also using components shared across several crane models, including the runner and jib. The AC 3.060-2 can also be prepared for the company's e-Pack system for emission-free crane operation.

Optional load and winch cameras are available as well.

The new crane is currently available to order in the Americas and Australia, with first deliveries expected later this year. Tadano plans to begin deliveries in Europe in 2027.

The company has also expanded production of its smaller 2- and 3-axle all-terrain cranes in Japan, with the AC 3.060-2 as the second model produced there.

For contractors, the appeal of the AC 3.060-2 comes down to flexibility. It is compact enough for confined sites, powerful enough for demanding lifts and designed to move between jobs without a complicated transportation setup.

That combination could make it a practical option for crews that need one crane to handle a wide range of everyday lifting work.