Gorman Rupp
The Prime Aire Plus priming-assisted pumps from Gorman Rupp offer increased head and flow compared with previous models and are available in sizes up to 8 inches with flanged discharge, flows up to 4,950 gpm and heads to 574 feet. The units are designed for clear liquids and liquids containing large solids and can fit other pumping installations. The Prime Aire Plus pumps are available coupled to the latest EPA tier-compliant engines or premium-efficiency electric motors.
Reader Service No. 150 • freeproductinfo.net/rer
Honda Power Equipment
Honda Power Equipment offers trash pumps for heavy-duty commercial, construction and agricultural applications. The WT series provides an OHV commercial-grade engine, full-frame protection, a quick-release clean-out and Silicon carbide mechanical seals. The WDP diaphragm pump moves wastewater containing up to 2.4-inch diameter solids and is designed for industrial applications. Features include die-cast aluminum case, air-cushion chamber, and rock channel that allows solids to pass. Each model is protected by Honda's oil-alert system.
Reader Service No. 151 • freeproductinfo.net/rer
Magnum Power Products
The LLC MTP6000D dry prime trash pumps from Magnum Power Products feature fuel capacity of 110 gallons delivering more than 30 hours of run time, teamed with auto start/stop controls that allow for unmanned operations. With six-inch diameter inlets and discharge ends, the pumps can handle up to 3-inch diameter solids with flow capacities of up to 3,050 gpm. Maximum lift suction is 28 feet and TDH is 165 feet.
Reader Service No. 152 • freeproductinfo.net/rer
Multiquip
The QP3TH centrifugal trash pump from Multiquip provides 3-inch suction and a dual 3-inch discharge port. The unit provides up to 396-gpm flow, 95 feet of head and 41 psi. The pump is designed to handle fluid with 25-percent solids by weight and can move solids up to 1.5 inches in diameter. Designed for industrial use, the QP3TH features ductile iron impeller/volute construction for abrasion resistance and long life with lightweight aluminum casing to facilitate pressure integrity, as well as silicon/tungsten carbide mechanical seals.
Reader Service No. 153 • freeproductinfo.net/rer
Subaru
Subaru semi-trash pumps are made with a heavy-duty overhead-cam gasoline engine, and a large volute discharge opening. The 2-inch PKX201ST is powered by the Subaru EX13, a 4.5-hp engine, and provides a delivery volume of 153 gpm. The 3-inch PKX301ST provides a delivery volume of 246 gpm and is powered by the EX17, a 6-hp engine. A hardened cast-iron volute withstands suspended particles and small solids sucked through the strainer. The silicon-carbide seal increases the durability of the self-lubricating mechanical seal. Other standard features include a toolkit, hose band and three-year warranty. The semi-trash pumps offer a low-tone muffler and a sound-suppressing air cleaner. The pumps also feature a U.S. Forest Service-approved spark arrestor. A heavy-duty steel roll cage wraps around the entire pump.
Reader Service No. 154 • freeproductinfo.net/rer
Thompson Pump
Thompson Pump now offers the Compact pump series, 35-percent smaller and 20-percent lighter than the previous JSC series. The unit has a 24-hour run-time fuel tank. Available in diesel-drive portable pump sizes of 4 and 6 inches, the Compact series includes the Enviroprime system, which keeps pumpage from discharging into the environment. Available with automatic start/stop and Silent Knight sound attenuation.
Reader Service No. 155 • freeproductinfo.net/rer
Tsurumi
The LB-800A dewatering pump is the automatic version of its LB-800. The unit incorporates stainless-steel probes within a rubber encapsulated timing relay that turns the pump off when the liquid being pumped falls below the probes. Pumps pass a maximum of 82 gpm with a shut-off head of 59 feet. The urethane rubber impeller and wear plates are designed to increase durability. The double inside mechanical seal with silicone carbide seal works with Tsurumi's patented oil lifter to enhance long life.
Reader Service No. 156 • freeproductinfo.net/rer
Wacker Neuson
Wacker Neuson's 2- , 3- , 4- , and 6-inch centrifugal trash pumps are designed for construction, mining, municipality, farm and machine applications. The PT 3 (pictured) is available in gasoline and diesel models and is capable of handling up to 356 gpm with solids sizes up to 1.5 inches. The PT 3 weighs 140 pounds and is powered by a 9-hp WM Wacker Neuson engine. The PT 3A weighs 149 pounds and has an 8-hp Honda engine, while the PT 3H weighs 161 pounds and is powered by a 6.8-hp Hatz diesel engine.
Reader Service No. 157 • freeproductinfo.net/rer
Cat Pumps
Cat Pump's 5CPS140 pump features a dual-extended shaft for pulley drive from either side of the pump using either a gas engine or an electric motor. The model 5CPS140G1 (pictured) is fitted with a gearbox for mounting directly onto any standard 1-inch shaft gasoline engine. Both models are designed to facilitate drive flexibility and high-pressure cleaning in a compact, lightweight footprint.
Reader Service No. 158 • freeproductinfo.net/rer
Xylem
Godwin Pumps Dri-Prime automatic, self-priming pumps feature the 6-inch CD 150M automatic-priming centrifugal pump. With solids-handling up to 3 inches in diameter, maximum flows of 1,700 gpm, 160 feet of dynamic head, and indefinite dry-running capabilities, the CD 150M is designed for dewatering and sewage bypass applications. Mounted on a highway trailer, the unit is engineered to be portable. It is available with a vacuum-priming compressor mounted to a diesel engine, and also comes in electric drive.
Reader Service No. 159 • freeproductinfo.net/rer
