Morbark
The Beever M6R drum-style chipper from Morbark features wider infeed and throat openings, allowing the operator to safely feed wide, branchy materials. The M6R features a direct-drive system with belt-power transfer and an automatic feed system, which increases chipping performance while reducing maintenance costs. The unit also offers a hydraulic drum braking system that stops the drum instantly when the engine is keyed off.
Reader Service No. 152 • freeproductinfo.net/rer
Turfco
Turfco Direct's Aerator 20 features a box frame, solid axles and sealed bearings. The covered chain and belt drives are protected from debris, which reduces downtime and chain problems. The unit can aerate up to 26,000 square feet per hour, completing up to 10 lawns per day. The handle of the Aerator 20 folds for easy transport and storage.
Reader Service No. 153 • freeproductinfo.net/rer
Rayco
Rayco introduces the RG 1635 Super Junior self-propelled stump cutter. The unit offers a twin cylinder 35-hp Vanguard engine. The RG 1635 also features hydraulic steering with pivoting front axle, anti-creep hill brake, variable travel speed and a quick-stop cutter wheel. Rayco also offers optional dual wheels, auxiliary chip retainer and a custom trailer.
Reader Service No. 154 • freeproductinfo.net/rer
Vermeer
The Vermeer S400TX mini skid steer features a 23-hp gas engine along with two joysticks, which control transport and boom/bucket motion and can be operated while holding onto an integrated hand-grip bar. Ground drive is controlled by a single joystick, and provides a smooth range of motion while operating the unit. The S400TX produces 3.8 psi of ground pressure and a hydraulic flow rate of 11.5 gpm. It delivers a tipping capacity of 1,430 pounds with a rated operating capacity of 500 pounds and a maximum 69 inches lifting height.
Reader Service No. 155 • freeproductinfo.net/rer
Turf Teq
Turf Teq introduces the Model 1305BC brush cutter, which features a 13-hp Honda engine and is self-propelled with a fully hydrostatic forward/reverse transmission. The variable-angle cutting head allows the operator to cut under fences, trees and other difficult-to-mow areas. On hillsides the pivoting feature adds stability to the machine by increasing its overall ground contact pattern. The operating speed is variable with the forward/reverse control lever at the operator's right hand.
Reader Service No. 156 • freeproductinfo.net/rer
Bobcat
Bobcat introduces the Toolcat 5610, which features a three-point hitch and hydraulic PTO for rear implements and the ability to run more than 40 front-mounted Bobcat attachments. A hydraulically driven motor powers the 540-rpm PTO to drive implements such as grain augers, multiple-stage mowers, tillers, sprayers and snow blowers. The 5610 is also a compact loader and attachment carrier, with a front lift arm that has a rated operating capacity of 1,300 pounds.
Reader Service No. 157 • freeproductinfo.net/rer
JP Carlton
The 660 6-inch disc-style wood chipper from JP Carlton features a compact size that allows it to be towed by compact trucks and SUVs. The 660 is designed for a variety of trimming, pruning and clean-up jobs. The unit's feed system and 27-hp engine provide increased power to complete jobs quickly and efficiently.
Reader Service No. 158 • freeproductinfo.net/rer
Precision Products
Precision Products introduces the 200-pound tow-behind spreader, which features an adjustable spray pattern that covers a 10- to 12-foot swath. The wire mesh filter and included rain cover keeps debris from clogging the distributor. Other features include durable metal gears, grease fittings, 1¼-inch powder-coated steel tubing and a heavy-duty plastic hopper.
Reader Service No. 159 • freeproductinfo.net/rer
Honda Power Equipment
The heavy-duty rear tine tiller (model FRC800) from Honda Power Equipment features a 20-inch tilling width and three tilling speeds. The unit's “loon handle” design allows for operation on either side of the unit and a unique tine configuration for smooth operation even in tough soils. The tines are 12 inches in diameter.
Reader Service No. 160 • freeproductinfo.net/rer
Continue on Page 2
Toro
The Toro Power Box Rake attachment is designed to transform rough terrain into a prepared seedbed. The rake attachment is suited for construction and renovation projects including seedbed and sod preparation, trench filling, windrowing debris and rock from landscapes, blending grades and leveling surfaces, as well as jobsite clean-up. Dual independently adjustable gauge wheels allow skim passes for over-seeding or can be set at an angle to cut drainage grades. A low-profile frame design offers improved visibility of all working parts. With a 4-foot width, the Power Box Rake is designed to manage small, confined-space jobs.
Reader Service No. 161 • freeproductinfo.net/rer
SourceOne
SourceOne's TurfSavr is designed for slicing, seeding and dethatching applications. The TurfSavr features either a 9-hp Vanguard Briggs & Stratton or 8-hp Honda engine. Heat-treated carbon steel knives are tightly spaced to improve seed penetration and germination. For dethatching applications, a dethatching flail reel easily installs after the hopper is removed.
Reader Service No. 162 • freeproductinfo.net/rer
TurfEx
TurfEx, a division of TrynEx International, introduces its line of bulk material spreaders. Designed to mount on tractors, utility vehicles or pickup trucks, the units are equipped with an auger for feed and control of bulk material, including fertilizer, compost, pelletized lime, topdressing and other granular products. The spreaders are available in two models: the MS-1875, which features a 9 cubic-foot-capacity hopper, and the MS-2000, which has an 11 cubic-foot-capacity hopper. Both models have adjustable stainless-steel spinners as well as variable-speed control, which is designed to ensure precise material feed and spread pattern. Spread width is adjustable up to 30 feet.
Reader Service No. 163 • freeproductinfo.net/rer
New Holland
The G5000 Series commercial zero-turn-radius mowers from New Holland comes equipped with the mower deck mounted to the front axle, rather than the frame, which allows the deck to float over changes in ground contour for a clean cut without scalping. A 149-square-inch discharge opening allows grass clippings to spread evenly in an 8-foot pattern without bunching or clumping. Each blade overlaps 1½ inches to prevent streaking. Powered by Kawasaki air-cooled gas engines, the units come equipped with a 54-, 60- or 66-inch mower deck.
Reader Service No. 164 • freeproductinfo.net/rer
Bush Hog
The powered 42-inch rotary cutter from Bush Hog (model GT42-08) features a Honda engine, centrifugal clutch and durable 12-gauge steel deck. The unit has an adjustable cutting height from 1 to 5 inches and a 3-foot, 6-inch cutting width. The GT42-08 also comes equipped with a swivel ball and pin hitch.
Reader Service No. 165 • freeproductinfo.net/rer
General Equipment
The 240 hole digger from General Equipment features a 1.6-hp Subaru four-stroke gasoline engine. The 240 produces a maximum drilling torque of 55 foot-pounds for improved digging performance. The 1-inch-diameter driveshaft connection allows the use of earth augers ranging from 2 to 8 inches in diameter. The digging depth is 30 inches, which can be increased with an available 15-inch, non-flighted extension.
Reader Service No. 166 • freeproductinfo.net/rer
MacKissic
The MacKissic Merry Commercial mini stump cutter's operator position allows the user to see the stump and cutter head at all times during operation. The cutter head orientation provides smooth stump removal, as well as safe operation. MacKissic's braking system stops the cutter head in less than three seconds.
Reader Service No. 167 • freeproductinfo.net/rer
Befco
The Model 106-130 Baby-Hop spreader from Befco is designed and sized for small tractors and ATVs. The ground-driven fertilizer spreaders feature a one piece seamless hopper, high-flotation air tires, a sturdy tubular frame and an even spread left-center-right pattern. The units are designed for gardens, green houses, nurseries and athletic fields. Row or broadcast spreading may be obtained by moving a single lever, and that same lever can be used for a predominant right or left swath spread pattern.
Reader Service No. 168 • freeproductinfo.net/rer
