General Equipment
General Equipment Co.'s FCS16 Rip-R-Stripper, an electric-powered floor-covering stripper, is designed for removing materials such as carpet, ceramic tile, linoleum and mastics. The Rip-R-Stripper is built with a ¾-hp, 115/230 VAC, 60-Htz electric motor. With an exciter unit mounted directly to the driveshaft, the machine used downward force to bore into and strip away the applied floor covering and adhesive. External weights can be added to provide extra force for removing tough residues and to increase material removal rates. Producing less than 70 dBA, operation noise is quiet and safe.
Reader Service No. 158 • freeproductinfo.net/rer
EDCO
EDCO concrete floor grinders improve concrete surfaces by removing deteriorated coverings, eliminating imperfections and preparing slabs for new overlays. The new PCD Dyma-Sert accessory uses polycrystalline diamonds to aggressively strip hard and soft coatings from concrete surfaces. Without changing the grinder, the new PCD Dyma-Sert accessory raises production and expands versatility.
Reader Service No. 159 • freeproductinfo.net/rer
Systems Material Handling
SMH adds a complete line of replacement brooms, brushes, pad drivers and squeegees to fit most brands of floor cleaners including Advance, American-Lincoln, Factory Cat, Power Boss and Tennant. All SMH replacement brooms, brushes, pad drivers and squeegees are manufactured to meet or exceed OEM specifications and are available in a wide range of types, material, grit and pattern options.
Reader Service No. 160 • freeproductinfo.net/rer
Hiretech Inc.
Hiretech's new HT8-EX expandable drum floor sander offers a 2-year warranty and is designed for do-it-yourself and rental users. Tool-free using slide-on sandpaper belts, the HT8-EX is available in single or multi-speed controls.
Reader Service No. 161 • freeproductinfo.net/rer
Husqvarna
The new PG 400 SF and PG 280 SF (pictured) floor grinders are designed for surface preparation and grinding of concrete, adhesive residue, paint and spackle. Both models are efficient grinding units due to high rpm levels and a wide range of available grinding disks. They are engineered for easy and convenient use, and feature an ergonomically designed handlebar and low noise levels. The PG400 is equipped with a 5.3-hp, 3-phase motor, while the PG 280SF features a 3-hp, 1-phase motor.
Reader Service No. 162 • freeproductinfo.net/rer
Clarke
The Focus II models are compact autoscrubbers available with Clarke's Boost technology that, the maker says, offers a 70-percent reduction in water and chemicals, a 40-percent increase in pad life, longer battery run times and performs chemical-free stripping. The autoscrubbers also feature benefits such as low noise levels, improved user ergonomics, on-board chargers and breakaway squeegees.
Reader Service No. 163 • freeproductinfo.net/rer
Diteq
The TEQ-Edge portable floor grinder features removable panels that allow for grinding up to the edge of the wall, eliminating the need for hand grinding. The side of the head cover comes off and the adjustable axle enables the grinder to hug the wall for greater ease. Two models are available; a 2-hp electric motor or a 5.5-hp Honda engine model. The grinder comes with an 8-inch segmented grinding head. Replacement grinding heads are available in 2 grit sizes: coarse and medium grit. The unit is designed for repairing worn, damaged or spalled concrete; grinding rough uneven slab surfaces; drainage control; and grinding hard surfaces, feather edging sidewalks, gutters and similar surfaces.
Reader Service No. 164 • freeproductinfo.net/rer
Nilfisk-Advance
The new Advance Condor XL rider-scrubber has a wide cleaning path for large cleaning applications and front-wheel steering for easy maneuverability. The unit features counter-rotating cylindrical brushes that sweep and scrub in a single pass for efficient cleaning in distribution centers, manufacturing plants, warehouses, beverage distributors or food processing facilities. With a 100-gallon solution tank and up to a 67-inch-wide cleaning path, the Condor XL can clean up to 100,000 square feet without stopping under normal scrubbing speeds.
Reader Service No. 165 • freeproductinfo.net/rer
Cherryhill Manufacturing
The U-Sand Pro from Cherryhill Manufacturing is lighter and more aggressive than the company's U-Sand floor sander. Weighing 85 pounds, the U-Sand Pro four-pad sander uses a patented random orbit technology designed to reduce the risk of damaging a floor. The U-Sand is designed for hard-to-reach areas like closets and hallways, and is virtually dust free, which saves clean-up time.
Reader Service No. 166 • freeproductinfo.net/rer
