Jenny Products
Jenny Products offers the GT Series, the company's smallest line of electric-powered, two-stage air compressors. Featuring high-pressure output, the GT Series is ruggedly built for professional use. The line consists of four models with 8-, 15-, 17- and 30-gallon tanks. All units produce 15.5 cfm at 100 psi or 15.2 cfm at 175 psi. They are driven by commercial-grade, 5-hp electric motors that operate from a 230-volt, single-phase power source. Other features include powder-coated air tanks and heavy-duty cast-iron compressor pumps.
Reader Service No. 150 • freeproductinfo.net/rer
Doosan Infracore Portable Power
The Platinum Series P185 portable air compressor from Doosan Portable Power is designed with advancements that offer improved performance and value for rental customers. Powered by a high-performance, 48-hp Tier 4 interim John Deere or Yanmar diesel engine, the P185 air compressor provides 185 cfm at 100 to 125 psi. The noise level of the new unit has been reduced by 50 percent and fuel efficiency has increased by 21 percent, providing a 10-hour full-load runtime on one tank of fuel. In addition, tool box space is 33-percent larger than the previous model.
Reader Service No. 151 • freeproductinfo.net/rer
Atlas Copco Compressors
The Atlas Copco XAS 375 JD6 Tier 3 portable rotary-screw air compressor is used in demanding applications including sandblasting and plumbing. The portable, single-axle XAS 375 compressor features the Atlas Copco C111 element designed for improved compression efficiency. The XC 2002 control module with LCD display provides integrated engine electronics for diagnostics and performance monitoring. The 375-cfm, 100-psi rotary-screw compressor is equipped with a John Deere 4-cylinder, water-cooled, diesel engine providing 115 brake hp at 1,500 rpm. It has a 38-gallon-capacity fuel tank and gull-wing doors for access to engine and components.
Reader Service No. 152 • freeproductinfo.net/rer
Bobcat
Bobcat offers three portable air compressor units for powering pneumatic tools. The 8-gallon models feature cast-iron compressors and puncture-proof tires. Two single-stage compressor pump models, including a 5-gallon unit that offers 4.1 cfm at 100 psi and an 8-gallon model delivering 13.1 cfm at 100 psi, make up the smaller units. A larger, 8-gallon, two-stage unit provides 17.2 cfm at 175 psi.
Reader Service No. 153 • freeproductinfo.net/rer
Kaeser Compressors
The new Mobilair M27 portable compressor offers 92 cfm at 100 psig. Like all Mobilair models, the M27 features a larger, slower turning airend to produce 15- to 20-percent more air per gallon of fuel than the competition. Its 3-cylinder, 21-hp Kubota diesel engine complies with Tier 4 emissions standards. The M27's roto-molded polymer canopy is scratch and dent resistant, and its heavy-duty chassis offers further protection from the elements and corrosion. The new model features a convenient tool box for storage, and is available as a skid-mounted utility model for cross mounting on service vehicles.
Reader Service No. 154 • freeproductinfo.net/rer
Sullair
The 375H AF portable air compressor is engineered to deliver instrument-quality compressed air conveniently and cost effectively to nearly any work setting. On construction sites, this mobile system provides clean, dry air for media blasting and painting or protective coating applications. Available with either Caterpillar or John Deere 4-cylinder diesel engines, the Sullair 375H AF compressor delivers 375 cfm at 150 psig.
Reader Service No. 155 • freeproductinfo.net/rer
Sullivan Palatek
The D250PJD compressor provides more air for larger and multiple-tool applications. The D250PJD shares the same 185/210 canopy, which has two full-length tool boxes, two large service doors, galvanized inner fenders and Galvaneal coating with Safety Orange powder-coated sheet metal for rust and scratch protection, plus a rear cooler cleaning access panel. Powered by an interim Tier 4, 74-hp John Deere diesel engine, the D250PJD has large two-stage air filters and a 29-gallon fuel tank for full-shift duties. The extra cfm will run more tools — up to 3 or 4 large breakers — and gives you more air for sprinkler blowouts and sandblasting, up to a No. 7 blast nozzle, all in the smaller 185P style package. A full gauge panel and automatic shutdown and protection systems are standard.
Reader Service No. 156 • freeproductinfo.net/rer
Mi-T-M
The 8-gallon single- or two-stage gasoline air compressor/generator combination allows the user to run air tools and electric power tools off one machine. Features include a splash-lubricated cast iron crankcase to extend the hours of performance; cast iron head for heat dissipation; and either a Honda OHV or Subaru OHC engine.
Reader Service No. 157 • freeproductinfo.net/rer