Product Spotlight, Compressors

June 1, 2010
Doosan Infracore Portable Power The Ingersoll Rand C185 compressor is designed for rental customers to provide reliability, performance and value. It

Doosan Infracore Portable Power

The Ingersoll Rand C185 compressor is designed for rental customers to provide reliability, performance and value. It produces 185 cfm at 100 pounds psi, runs off a high-performance, 49-hp Kubota diesel engine, and has an 8-hour run time. The C185 weighs 1,825 pounds and has two service ports for multi-tool use. It features a new single-piece canopy that is lockable, lightweight, aerodynamic and made of durable composite material.

Reader Service No. 151 •

Kaeser Compressors

Kaeser Compressors' Mobilair M57 Utility portable compressor delivers 210 cfm at 100 psig. Its design includes an easy-to-read curbside instrument panel protected by an aluminum-hinged lockable door, as well as forklift slots and a single-point lifting bail to make cross-mounting on service vehicles an easy task. Its 28-gallon fuel tank provides 10 hours of uninterrupted operation and its high-capacity, cold-start battery ensures reliable operation in severe working conditions. The Sigma Profile airend produces more air with less horsepower and complies with Tier-4 EPA emissions standards.

Reader Service No. 152 •

Jenny Products

Jenny Products introduces the J11HGA-30P single-stage gas-powered wheeled portable compressor. The unit features a 30-gallon air tank and a belt-driven J pump, which is a single-stage, four-cylinder pump with a high compression ratio for producing maximum air flow. It delivers 21.3 cfm at 100 psi or 20.9 cfm at 125 psi. An 11-hp Honda GX gasoline engine powers the compressor and the unit's unloading valves and a large flywheel allows easy recoil and starting. In addition, Jenny's Ultimate Blue synthetic pump oil protects the unit's pistons, crankshaft, bearings, rings and cylinders through a splash lubrication system.

Reader Service No. 153 •

Chicago Pneumatic

The new CPS 185 PD portable air compressor from Chicago Pneumatic is designed for the municipal sector. The corrosion-resistant galvanneal-steel canopy opens for easy access and serviceability. The control panel and discharge valves are located at the rear of the compressor for convenience. A compact, lightweight design with recessed towing lights and a rear bumper provide greater maneuverability and added safety while towing. The CPS 185 PD features a direct-drive airend that provides 185 cfm of compressed air at 100 psi using a 49-hp Perkins interim Tier-4 engine.

Reader Service No. 154 •

Sullivan Palatek

The D185P3 rotary screw portable air compressor from Sullivan Palatek is a lightweight, compact unit that features large gull-wing doors for easy service access. Stop, turn and tail lights are standard equipment along with heavy duty safety chains and either ball or lunette eye type hitch.

Reader Service No. 155 •

Atlas Copco Compressors

Atlas Copco introduces the ZoneAir XATS 1020, an ATEX-certified containerized portable compressor for the oil and gas industry. With a capacity of 1020 cfm at 150 psi, the ZoneAir XATS 1020 provides energy-efficient performance for applications such as offshore painting, sandblasting, gas flaring, well testing and enhance oil recovery. Its containerized housing and forklift slots make it easier to transport and stack for flexibility and versatility on site. It features a 180-gallon stainless-steel fuel tank for eight hours of operation at full load.

Reader Service No. 156 •