Pioneer Pump
Pioneer Pump offers its vacuum-assisted, run-dry, dry-prime, high-performance centrifugal pumps, which are offered in solids-handling or clear-liquid models. Available configurations include engine-driven skid- or trailer-mounted packages and electric-driven models. Sound-attenuated packages are offered with dba ratings to 60 dba at 21 feet.
Circle 166 on Reply Card ▪ freeproductinfo.net/rer
Stens Industrial
Stens offers a variety of General Pump pumps, injectors, nozzles and Karcher parts for use in pressure washers — one of the fastest-growing segments in the rental industry, according to the company. Guns, wands and hoses are also available.
Circle 167 on Reply Card ▪ freeproductinfo.net/rer
Multiquip
Multiquip's new 4- and 6-inch submersible pumps are designed specifically for high-head applications and those where operators need an appreciable flow. A streamlined design makes these models suitable for use in mines, industrial settings and other deep dewatering applications. The ST-4125D (pictured) and ST-6125D can pump water to a height of 125 feet above the source. The 4-inch ST4125D has a maximum flow of 464 gpm. The 6-inch ST-6125D has a maximum flow of 610 gpm.
Circle 168 on Reply Card ▪ freeproductinfo.net/rer
Subaru Robin
Subaru Robin's high-pressure pump combines an overhead-cam engine with high-pressure capabilities and heavy-duty construction. Powered by a 6-hp Subaru Robin EX17 engine, the 2-inch PKX201H offers a lift height of up to 275 feet and a maximum delivery rate of 127 gpm. It employs a large-diameter impeller with shallow veins to attain the high pressure needed for applications such as lawn and garden sprinkler systems, water transfer to high places, and secondary fire-fighting support.
Circle 169 on Reply Card ▪ freeproductinfo.net/rer
Atlas Copco
Designed to be compact and lightweight, the Atlas Copco LWP 2 submersible water pump is built for a range of applications, including continuous pumping of clean or contaminated water on building sites, excavation sites and basements. The 2-inch pump is capable of handling stones and other debris of up to 3/8 inches in diameter. The LWP 2 produces a discharge of up to 222 gpm, and has a lifting head of up to 82 feet. It is spark proof and can run dry without sustaining damage to internal components. At 23 pounds, the pump is well suited to utility and service contractors who require equipment to be mobile.
Circle 170 on Reply Card ▪ freeproductinfo.net/rer
Rain for Rent
The DV-150 6-inch by 6-inch centrifugal pump is designed with a fully automatic priming system built in that enables the pump to self prime from completely dry conditions, even with extended suction lines. The pump can handle raw, unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3 inches in diameter. The pump volute is made of close-grained spheroidal-graphite cast iron, and fitted with replaceable 316 stainless-steel wearing parts, which simplifies and reduces the cost of pump rebuilds.
Circle 171 on Reply Card ▪ freeproductinfo.net/rer
Godwin Pumps
The new sub-prime electric submersible pump from Godwin Pumps features a compact, slim-line design with convenient top discharge and is capable of maximum heads to 65 feet and maximum flows of 140 gpm. Powered by a dual-voltage motor, the pump is designed to provide easy field changeover. Capable of fitting in caissons or casings 8 inches in diameter, the GSP20SL pump is built for construction, mining and industrial dewatering applications.
Circle 172 on Reply Card ▪ freeproductinfo.net/rer
ITT Flygt
ITT Flygt recently introduced its latest generation of stainless-steel submersible dewatering and solids-handling pumps. Designed to be extremely wear resistant, robust and easy to maintain, the pumps operate in the pH range of 2 to 10, making them well suited to acid-mine drainage, wash-water sumps in pickling bath processes in the steel industry, as well as many other corrosive environments. Model BS-2740 (pictured) operates on three-phase 230/460/575 V, and is rated at 9 hp. The high-head BS-2740 develops up to 150 feet of head, delivering up to 250 gpm of liquid, while the standard version pumps up to 600 gpm.
Circle 173 on Reply Card ▪ freeproductinfo.net/rer
Honda Power Equipment
Honda's general-purpose pumps are designed for moving clean, uncontaminated water from one place to another. Applications include irrigation, flood control, light construction, firefighting and swimming pool drainage. The WH20X high-pressure model has a GX160 OHV engine and is designed to discharge up to 134 gpm. Other features include 2-inch ports, high output and maximum pressure of 61 psi.
Circle 174 on Reply Card ▪ freeproductinfo.net/rer
Thompson Pump
The JSC Series solids-handling Enviroprime pump features heavy-duty cast-iron construction, and is designed with the ability to dry-prime and re-prime automatically. It is well suited for general construction dewatering and sewage-bypass applications. The 6-inch pump is engineered for flows to 2,500 gpm, maximum heads to 195 feet, and can handle solids up to 3 inches. It features the Enviroprime compressor-assisted dry-priming system, which prevents blow-by, such as sewage and waste, from discharging onto the ground, making it environmentally safe.
Circle 175 on Reply Card ▪ freeproductinfo.net/rer
Wacker
Wacker's line of centrifugal trash pumps includes the PT 3 3-inch series, which is available in both gasoline and diesel models. All PT 3 series pumps are capable of handling up to 400 gpm with solids sizes up to 1.5 inches. The PT 3 weighs 132 pounds and is powered by a 9-hp WM Wacker engine. Features include a hardened ductile iron impeller and volute with a patented volute insert designed to provide a rugged, easy-to-maintain pump that will stay on the job longer.
Circle 176 on Reply Card ▪ freeproductinfo.net/rer
Gorman-Rupp
The new pump model PA6C60-4045T-ESP from Gorman-Rupp is designed to offer high-performance, sound attenuation and an environmental containment base. It has flow rates up to 2,750 gpm, heads up to 200 feet and can handle 3-inch solids. The pump has the ability to run dry indefinitely with no damage, the company says. The environmental base is engineered to contain all fuel and engine liquids that could otherwise leak directly onto the ground during an accident. Suggested applications include sewer by-pass pumping or applications that require sound attenuation.
Circle 177 on Reply Card ▪ freeproductinfo.net/rer
Magnum Products
The new wet- and dry-prime trash pumps from Magnum Products are available in 4-inch and 6-inch output models and are designed to handle up to 3-inch diameter solids. Engineered with a fuel capacity of 110 gallons that delivers a minimum 24-hour run time, the pumps can also be supplemented with a fuel transfer pump for extended run times from a remote fuel source as well as with a low fuel-level shutdown to avoid costly time delays. The new standard package includes a heavy-duty trailer with a 5,000-pound axle and surge brakes, and a new flip-tongue design. The pump unit can be detached from the trailer, allowing for skid-mounted use.
Circle 178 on Reply Card ▪ freeproductinfo.net/rer
Stow
Stow's self-priming diaphragm pumps are designed to handle everything from clear water to heavy sludges and slurries. The DP-2 (pictured) and DP-3 are engineered for cleaning out cesspools and septic tanks, draining slow seepage from small excavations, trenches and construction sites, and pumping industrial waste. The DP-2 has a maximum capacity of 3,000 gph, and the DP-3 pumps up to 5,100 gph. Driven by a 4-hp Honda GX-120 gasoline engine, the pumps feature a heavy-duty aluminum body, lubricated spur gear and automatic oil shutdown.
Circle 179 on Reply Card ▪ freeproductinfo.net/rer
Moving Water Industries
MWI introduces the newest addition to its lineup — The Silent Partner. Pictured is the high-performance, automatic-priming, run-dry PrimeRite pump with the specially designed, sound attenuation enclosure. These units are suited for residential areas, near hospitals, government buildings or schools, and wherever else quiet operations are required. The design of the Silent Partner is optimized for pumps that run hard in difficult environments. The heavy-duty Silent Partner is engineered to be quiet, run cool and provide easy access to all components.
Circle 180 on Reply Card ▪ freeproductinfo.net/rer
MMD Equipment
The BTR Series from MMD Equipment is designed to be versatile. The BTR-400S and both the 120-volt and 230-volt BTR-750S 2-inch submersible pumps are capable of pumping at high heads and will fit into standard 8-inch pipe casing. The BTR-1500S 3-inch submersible pump is designed to move nearly twice as much water as the company's 2-inch pumps. An internal voltage selector circuit board allows the operator to use this pump from either 120-volt or 240-volt power sources. In addition, the company's BHV-401S is a true submersible trash pump that will handle 1-inch solids.
Circle 181 on Reply Card ▪ freeproductinfo.net/rer
Tsurumi
The new HS3.75 is designed to pump sands, solids and debris with minimal wear and clogging. Features include a built-in shaft-mounted agitator that suspends solids; a urethane semi-vortex impeller for maximum durability and maintaining pump performance; and a double inside mechanical seal with SiC faces to provide long operational life. In addition, a patent-pending oil lifter provides lubrication of the seal faces, and a V-ring seal protector protects the mechanical seal from abrasive particles.
Circle 182 on Reply Card ▪ freeproductinfo.net/rer
