Late-Year Gear

Aug. 1, 2007
Ingersoll Rand The HP60CMH air compressor is part of the Ingersoll Rand Onboard Power Solutions line and is designed to be mounted on standard-sized utility

Ingersoll Rand

The HP60CMH air compressor is part of the Ingersoll Rand Onboard Power Solutions line and is designed to be mounted on standard-sized utility body trucks. This hydraulic-drive, truck-mounted air compressor delivers free air at 60 cfm at a rated operating pressure of 150 psi. Powered by the hydraulic system on the truck, the HP60CMH requires 18.1 gpm of hydraulic flow at 2,295 psi hydraulic pressure to maintain full-load, continuous-duty operation. The unit will run light air tools and larger pneumatic tools such as 50-pound breakers.
Introduced to the market: October 2007
Circle 143 on Reply Card
freeproductinfo.net/rer

Allmand

In addition to the standard Night-Lite Pro (pictured), Allmand now offers the Night-Lite Pro International, Night-Lite Pro Arctic Special and the Night-Lite Pro CSA Approved. The International package features two Schuko receptacles and a 6-kW, 220-volt, 50-hertz power generator to make it suitable for locations outside the United States. Also, the CSA package meets all Canadian Standards Association requirements with a VIN package, UL-approved luminaire and CSA-approved wiring harness. Designed for cold-weather environments, the Arctic Special package features an engine block heater, heavy-duty battery with an electric battery blanket, a remote oil drain, tubes in the tires and a CSA-approved harness.
Introduced to the market: May 2007
Circle 144 on Reply Card
freeproductinfo.net/rer

Shindaiwa

The GP3410 industrial centrifugal pump from Shindaiwa features a centrifugal-type pump, convenient-carry handle, push-button stop switch and fully enclosed mechanical seals. The 34cc, 1.4-hp unit is powered by the high-torque Shindaiwa 3410-series C4 technology engine. Each pump contains all hardware and a strainer, as well as an electric ignition system and a die-cast all-metal impeller. The GP3410 offers a two-year consumer and one-year commercial warranty, and a limited lifetime warranty of major ignition components.
Introduced to the market: September 2007
Circle 145 on Reply Card
freeproductinfo.net/rer

Allied Construction Products

The Skid-Pac Model 1000 compactor from Allied Construction Products is designed for use in preparing streets prior to concrete paving, backfilling against curbs and gutters, smoothing and compacting sub-soil to prepare for sodding, and asphalt patch work repairs. Mounted on a skid steer, the 1000 can travel quickly over soil in flatwork, delivers increased impact energy, has an efficient four-function valve and maintenance-free oil splash bearing lubrication. The base plate compacts soil in flatwork while the skid steer is moving forward or in reverse.
Introduced to the market: July 2007
Circle 146 on Reply Card
freeproductinfo.net/rer

Miller Electric

Miller Electric offers the Bobcat (pictured) and Trailblazer gas-powered welder/generators with either a 24-hp Kohler or a 22-hp Robin engine option. The increased horsepower provides stronger welding output for running larger diameter wires and stronger generator power for sudden, heavier loads, such as motor starting. Miller's Auto-Crater feature on the Trailblazers helps eliminate crater-related DC TIG weld defects. New maintenance displays include an oil change countdown that shows the time remaining until the next oil change and an engine rpm display on the Trailblazers for easy diagnostics.
Introduced to the market: July 2007
Circle 147 on Reply Card
freeproductinfo.net/rer

Toro

The Toro grapple rake attachment, for use with Toro Dingo compact utility loaders, is designed for picking up and removing trees, bushes, roots and rocks, as well as demolition and construction debris. The grapple rake attachment is 34.5 inches wide, weighs 270 pounds and includes two hydraulic cylinders. It operates like a bucket when used with the loader. Operators can raise and lower it, as well as roll the unit over and back-rake material away from buildings and fence lines. The attachments' clamping force from tip to tip is 3,000 pounds, and its tines are strong enough to dig up roots and rocks.
Introduced to the market: July 2007
Circle 148 on Reply Card
freeproductinfo.net/rer

Riveer Environmental

The Typhoon portable wash station from Riveer Environmental is completely self-contained and the blue and powder-coated steel makes it easier for users to clean small equipment quickly while complying with environmental standards. The Typhoon has automatic controls and a pressure washer gun, which is attached to an overhead boom, gives easy 360-degree washing access from outside the wash rack. The built-in access ramp closes automatically. The Typhoon installs, and re-installs, quickly in the area of one parking space and performs well on uneven ground because its grated sump pulls water from both ends at once.
Introduced to the market: July 2007
Circle 149 on Reply Card
freeproductinfo.net/rer

Stihl

Stihl introduces the 12-inch TS 410 (pictured) and 14-inch TS 420 Cutquik cut-off machines. The saws feature the X2 Air Filtration System, which delivers 99.96 percent clean air to the machine. This system not only eliminates the need to clean the filter, but it reduces down time because of on-the-job filter maintenance that extends filter life. The TS 410 and TS 420 also feature an anti-vibration system that reduces vibrations by 43 percent as compared to previous models. The upright, large-capacity fuel tank can provide a 20-percent longer run time than previous models.
Introduced to the market: June 2007
Circle 150 on Reply Card
freeproductinfo.net/rer

McLaren

McLaren introduces the NU-AIR AT, a new all-terrain tire for skid steers and backhoes that combines the cushioned ride of pneumatic tires with the durability of solid tires. Featuring strategically placed holes throughout its specifically engineered sidewalls, the NU-AIR AT is resistant to cuts and snags in severe operating conditions. The placement and depth of the sidewall holes are designed to create proper cushioning for optimum machine performance and longevity.
Introduced to the market: June 2007
Circle 151 on Reply Card
freeproductinfo.net/rer

Diamond Products

Diamond Products introduces new products to its line of concrete polishing equipment and tools. These products include the DS301HD and the Edge Pro Counter Top Edging Machine. The DS301HD is a more powerful version of the DS301 hand-held polisher unit. Other new product items include an expanded selection of wet grinding discs as well as polishing pads for concrete, marble, granite and hand pads. Router bits are available to work with the Edge Pro edging machine.
Introduced to the market: July 2007
Circle 152 on Reply Card
freeproductinfo.net/rer

Kubota

The RTV1100 with premium grand cab from Kubota is a utility vehicle engineered for all-weather protection and comfort with a factory-installed cab, standard air conditioning, heater and defroster. Available in worksite and recreational models, the heavy-duty RTV1100 comes standard with variable hydrostatic transmission, power steering, sturdy front guard, 4-wheel wet-disc brakes, hydraulic bed-lift system and more than 1,100 pounds of cargo-load capacity in the 16-cubic-foot bed.
Introduced to the market: July 2007
Circle 153 on Reply Card
freeproductinfo.net/rer

Orion Software

Orion Software introduces Sirius Pro, a rental and inventory management solution with functions that are designed to improve businesses processes through better tracking and less redundancy. Features include a drill down calendar to see the availability of specific items, more than 100 different reports to help analyze and improve operations, bar-coding, equipment reservations management, automatic periodic billing, and real-time multi-branch functionality.
Introduced to the market: July 2007
Circle 154 on Reply Card
freeproductinfo.net/rer

Atlas Copco Construction Tools

Atlas Copco Construction Tools introduces the diesel-powered LP 13-20 DEL to its line of hydraulic power packs. The power pack places less load on the engine when working with demanding tools such as heavier hand-held hydraulic breakers, and is built to withstand vibrations during operation. The LP 13-20 DEL is powered by an air-cooled, 10-hp Lombardini series diesel engine with recoil and electric start. The pack offers hydraulic oil flow of 5.3 gpm at a maximum pressure of 2,175 psi. The power pack has an oil capacity of 1.3 gallons and an attached tool.
Introduced to the market: June 2007
Circle 155 on Reply Card
freeproductinfo.net/rer

Manitowoc

The Grove GTK110 crane from Manitowoc features a vertical telescopic mast mounted to an upperworks that allows it to reach heights of more than 140 meters (459 feet). The GTK1100 has a 76.5-meter (251 feet) vertical tower, which is topped with a five-section, 60-meter (197-foot) telescopic boom. The crane features a small footprint and is designed for applications where large loads must be lifted to tall heights or where set-up space is limited. The primary carrier of the GTK is based on a standard semi-trailer and the only assist unit required is a 220-ton all-terrain crane. Four outriggers connect to the carrier, while four spreaders attach to the top of the vertical mast, which sits on the carrier.
Introduced to the market: December 2007
Circle 156 on Reply Card
freeproductinfo.net/rer