Tamper
The new BT65/4 tamper from Bomag offers the operating convenience of a 4-cycle engine while maintaining the high stroke and impact force of a two-cycle model. In addition, it can be transported in a horizontal position without concern for oil contamination of the cylinder, muffler, carburetor or air filter. Powered by a 3.3-hp, Honda GX100 engine, the 152-pound tamper delivers up to 3,200 pounds of impact force. With a maximum travel speed of 66 feet per minute and a range of 540 to 690 impacts per minute, the unit can compact up to 20 cubic yards of select material per hour in a coverage area approximating 3,600 square feet.
Circle 513 on reply card.
Compact Excavators
Mustang Mfg. introduces four new models to the company's compact excavator product line. In addition to upgraded operator compartments, the new models — ME2503, ME3003, ME3503 and ME3703 — have improved digging depths, higher breakout forces and increased lift capacities compared to previous models. The new 3-ton models are equipped with hydraulically dampened drive levers and pedals, giving operators an improved feeling of security with increased precision. Operators will enjoy the models' enhanced operator compartment, which includes easy-to-read instrumentation, ergonomically designed levers and seating and improved ventilation on models with the optional cab.
Circle 514 on reply card.
Tractor Loader Backhoe
The 110 tractor loader backhoe from John Deere is lighter in weight and shorter in length, providing more maneuverability and easier transport. With a 43-hp Yanmar diesel engine and the power and economy of direct fuel injection, the product starts very quickly even in cold weather. It features a fully independent 33-hp PTO and a Category I 3-point rear hitch, making it an excellent choice to complete all types of utility chores. With a lift capacity of 2,727 pounds at pivot points, the machine has a boxed-beam construction-style loader that is precision cut and robotically welded from high strength steel.
Circle 515 on reply card.
Yard Dog
The new Terex Yard Dog quickly and easily helps organize a yard. It is capable of pulling most single axle units and is equipped with a 2-inch ball for towing. The product is lockable for towing units with ring hitches. It picks up units with hitch from 3 to 25 inches above ground.
Circle 516 on reply card.
Light Towers
The new Allmand 15330 and 20330 portable light towers are equipped with larger generators that allow the units to power a variety of auxiliary equipment. The new models also feature Allmand's exclusive Super High Output lamp fixtures and a powerful diesel engine. The lights are available with four- to six-SHO fixture configurations carrying metal-halide or high-pressure sodium lights. An optional Saf-T-Visor attachment reflects previously wasted light directly onto the worksite.
Circle 517 on reply card.
Soil Cultivator Attachment
The soil cultivator attachment for use on Toro Dingo compact utility loaders efficiently transforms rough terrain into an ideal planting bed in a single pass. It has an optional seed box attachment that allows users to cultivate and seed simultaneously. The rear mesh roller on the cultivator mixes the seed and soil to create optimal germination conditions. The seed box features a seed density selector that allows the operator to accurately select the amount of seed applied.
Circle 518 on reply card.
Welder/Generator
The Lincoln Electric Commander 500 multi-process, engine-driven welder/generator now offers contractors the choice of the well-respected Cummins engine. It is also available with a Deutz engine for those who prefer this engine option. The welder/generator provides 500 amps of pure welding power at 100 percent duty cycle and is ideal in construction, maintenance, repair and pipe welding. Besides being a DC multi-purpose welding machine, the product generates 12,000 watts of continuous duty AC generator power from the 120V/240V full-KVA receptacle or 4,800 watts of AC generator power from two 120V duplex receptacles.
Circle 519 on reply card.
Vibratory Plate Compactor
Equipped with a patent-pending vibration system, the BXR-100H from Ingersoll-Rand offers smooth, reversible movement and high compaction performance to maximize productivity in sand, gravel and mixed soils. Reversing permits the operator to enter and exit a confined work area along a single path. At 330 pounds, the machine offers 5,511 pounds of centrifugal force at 4,200 vpm. Powered by a 4-hp, 4-cycle, Honda gasoline engine, the compactor has a recoil start.
Circle 520 on reply card.
Material Handler
The new Model G9-43A material handler by Gradall and JLG offers a 9,000-pound capacity, a 43-foot maximum lift height and a 30-foot reach in addition to the collection of productivity advantages in the Gradall G Series family of machines. The machine's backbone frame is offset slightly to the operator cab side, bringing the mid-mounted engine closer to the center of the machine for even left-right weight distribution. The even weight distribution advantage complements the Model G9-43A's long wheelbase and low center of gravity, helping to keep the machine both mobile and versatile while working on slopes as well as on dirt, gravel, sand or in sticky mud. The Deere 4045TF150 99-hp engine is located in a new low, mid-mounted compartment, making routine service functions convenient at ground level.
Circle 521 on reply card.
Inspection Camera
Use the Gen-Eye from General Pipe Cleaners for in-line inspection and preventative maintenance of sewer and drain lines, septic tanks, heating and cooling ducts, crawl spaces, chimneys, attics, wells and much more. The camera is built to take a pounding and still transmit pictures so clear one can read the head of a penny. A durable stainless steel body protects the camera from abrasive surfaces such as rusty cast iron, while a scratch resistant sapphire lens keeps pictures crystal clear as the camera focuses on objects just inches away. Dimmer controlled LED lights give plenty of illumination to show what trouble lies ahead.
Circle 522 on reply card.
Tiller
Maxim heavy-duty chain rental tillers are durable, simple to operate and easy to maintain. The frames have additional reinforcement at points of stress. Chain drive transmissions are enclosed in a special design double welded case with additional reinforcements to keep lower supports secure. An extra metal shield keeps wire and vines from getting into the seal.
Circle 523 on reply card.
Engines
The models EY15-3 and EY20-3 from Robin Subaru have power output of 3.5 hp and 5 hp, respectively. A newly designed single piece muffler system is more compact and lowers exhaust noise. Engine and emission performance is also improved because of reduced exhaust restriction. The newly designed muffler, air cleaner and recoil reduce the overall size of the engines for easier mounting on a wide variety of equipment.
Circle 524 on reply card.
Combihammer
Featuring Active Torque Control the Hilti TE 76-ATC combihammer provides a rental customer with operator protection by monitoring the tool when it is being used. If it senses the tool body starts to spin too quickly, for example, when a bit becomes stuck in the hole, it disengages the motor from the gearing and turns it off. ATC also monitors the electrical flow to determine when the power is interrupted. Weighing 17.4 pounds and having a 1,300-watt motor, the tool takes on applications such as repetitive anchor hole drilling, percussion core drilling and chiseling applications.
Circle 525 on reply card.
Grinder
DeWalt's new DW827 high-powered 6-inch grinder has a dual rated 10-amp AC, 8-amp DC motor that runs at 9,000 rpm and produces 1,300 maximum watts out for tough metal cutting and grinding applications. The tool's metal gearcase dissipates heat for longer bearing, gear and motor life. The motor's ball and roller bearings add durability, while a sealed switch prevents dust penetration. The slide switch makes the grinder more comfortable to use during extended use applications.
Circle 526 on reply card.
Containment System
Diamond Products introduces its new Core Bore recirculating slurry containment system. The system works with the company's M-1 and M-2 core rigs to trap slurry, recirculate water and keep the work area clean. The system includes a ring assembly and vacuum unit that traps slurry and recirculates water. The easy to apply ring connector mounts onto the core bit.
Circle 527 on reply card.
Trencher
The new RT100 trencher from Vermeer Mfg. packages innovative hydrostatic technology and greater horsepower into its new family of walk-behind trenchers. The design eliminates all belts, pulleys and gears, reducing maintenance costs. The unit also is capable of reversing the digging chain when the operator encounters underground obstructions like tree roots or rocks. The hydrostatic ground drive is equipped with twin wheel motors that eliminate the need for locking differentials to maintain its maneuverability.
Circle 528 on reply card.
