Hilti
The Hilti DS-HS 80 V2 hand-held gas saw provides a redesigned starter assembly, a cooler-running motor and redesigned tank geometry that is designed to improve fuel intake. Providing increased performance in deep cuts, the saw also features a new carburetor setting for increased acceleration, while the narrow tool body and tall motor provide balance and less vibration for optimum working comfort. Hilti offers a complete selection of diamond blades for a variety of applications and base materials.
Reader Service No. 169 • freeproductinfo.net/rer
Diteq
Diteq Corp. introduces the G-Teq early entry green saw, which is an up-cut saw that features the patented FlatTrac wheel system to prevent spalling. The FlatTrac contact roller wheels press down on both sides of the blade, eliminating the need for skid plates. The G-Teq is available with a 4.5-hp Subaru gas engine or a 1.5-hp electric motor. The unit is lightweight and portable allowing for one operator to load and unload the saw. It is manually pushed and all controls are conveniently located and manually operated.
Reader Service No. 170 • freeproductinfo.net/rer
RGC
The RGC FS20 flat saw is designed for flush and corner cuts up to 8 inches deep. The unit is capable of cutting wet, dry, vertically, horizontally, under water and in confined areas. The FS20 is also designed to cut concrete, stone, brick, block, pipe, reinforced concrete, steel beams and aggregates quickly and cleanly. The unit features a dual-function trigger for automatic wet cutting, a heavy-duty guard for flush cutting and a guard attachment for standard cutting.
Reader Service No. 171 • freeproductinfo.net/rer
Stow
Stow's redesigned Trak-14 masonry saw is designed to make longer cuts and can handle larger pieces of material. The masonry saw can be disassembled, transported and reassembled quickly and safely by one person. The saw features a water tray that provides an additional 3 inches of cutting length. The unit's cutting head pivot arm has been relocated to a support brace so that longer pieces of material can be cut in a single pass, according to the manufacturer. Improved bladeshaft spindle bearings and a modified cutting-head spring help reduce operator fatigue.
Reader Service No. 172 • freeproductinfo.net/rer
Husqvarna
The FS 520 from Husqvarna features the patent-pending IntelliSeal bladeshaft system that allows for a minimum of 250 maintenance-free hours and eliminates daily greasing of bearings. The engine and bladeshaft-mounting system are other patent-pending features of the FS 520. It reduces overall vibration of the saw that produces better overall cutting performance, the maker says. It also significantly reduces vibration at the operator handles. The handlebar system easily adjusts to the operator's preference and the handles can be folded for transportation and storage.
Reader Service No. 173 • freeproductinfo.net/rer
Multiquip
The Multiquip MP3 is designed for the efficient cutting of bricks, block, interlocking pavers, stone, terra cotta and roofing tiles. Positioning of the operator handle allows an unobstructed view of the work surface during all cutting operations, promoting safety and ensuring pinpoint cutting accuracy. Sporting a 14-inch blade capacity, the MP3 is powered by a 2.5-hp, 115-volt, single-phase motor. The motor operates at 3,600 rpm and features a removable and washable foam air filtration system and water pump cordage. This compact masonry saw weighs 70 pounds. The unit's frame is built with rigid aluminum die-cast tubing for improved strength in demanding environments.
Reader Service No. 174 • freeproductinfo.net/rer
CS Unitec
The CSR 150 pneumatic walk-behind saw weighs 107 pounds and is easily portable between work sites. It is designed for breaking out concrete and asphalt; and for performing applications such as joint sawing, floor sawing, trenching and road repair. An easy-to-use crank handle raises and lowers the blade for cutting depths up to 7 inches. This 9.5-hp saw is available with a blade capacity of up to 20 inches in diameter. Because the unit is air-powered and emits no exhaust fumes, it can be used indoors. It can also be used wet or dry; a ¾-inch water connection port is built in and it includes a splash guard for wet cutting applications.
Reader Service No. 175 • freeproductinfo.net/rer
Wacker Neuson
Wacker Neuson's BFS series of walk-behind saws offers a new design that distributes the majority of the machine's weight allowing it to pull the saw forward with less effort and providing straighter, more stable cuts. Other features include a vibration-damping ergonomic handle system that makes individual adjustments to the handle width and height possible. The walk-behind saw line includes three standard and two self-propelled models. The standard models are available in 14- and 18-inch blade guard diameters, and are equipped with either a 9-hp Honda or Wacker Neuson engine. The self-propelled models are available in 18- and 20-inch blade guard diameters and are powered by Honda engines.
Reader Service No. 176 • freeproductinfo.net/rer
Edco
Edco introduces the DS-18 concrete and asphalt saw, which features a 13-hp gasoline engine or 5-hp electric motor with a heavy-duty, anti-vibration engine mount and a 7-gauge, solid-steel frame. The saw also offers an 18-inch blade capacity with dual-arbor cutting along with lifting handles, a lifting bail and improved balance.
Reader Service No. 177 • freeproductinfo.net/rer
Doosan Infracore Portable Power
Doosan Infracore Portable Power offers seven models of Ingersoll Rand WS-Series walk-behind concrete saws. The WS14, WS14C (pictured), WS16C, WS18 and WS20 models come with a Honda engine ranging from 8 to 20 hp. The WS26D and WS36D are equipped with either a 31- or 57-hp Deutz engine, respectively. The WS14, WS16 and WS18 saws are manually propelled and have a recoil starting system, while the larger models — the WS20, WS26D and WS36D — feature hydrostatic propulsion and an electric-starting system.
Reader Service No. 178 • freeproductinfo.net/rer
ICS Blount
ICS introduces the 680GC gas-powered concrete chain saw that features improvements to carburetion, the starting system and airflow. The saw weighs 21 pounds and requires standard garden hose water pressure for its wet-cutting system. Its 80-cc, 2-stroke engine generates about 6 hp and the unit features special seals and filtration to protect key components from harsh environments in concrete cutting. ICS also offers the 680GC with its RentMax diamond chain system. Available with either 12- or 14-inch guide bars, the unit is able to plunge cut to 14 inches and make square corners with no overcuts in reinforced concrete, natural stone and masonry.
Reader Service No. 179 • freeproductinfo.net/rer
Blastrac
The Sawtec hand-held Dekrasaw from Blastrac is designed for the decorative concrete industry and can be used by one person to cut and score decorative lines into concrete. This 110-volt saw is composed of an aluminum base and features an optional pivot base that can be used for radial cuts to create geometric shapes, arcs and circles. For safety and conveniences, a spring-loaded head allows users to easily push the blade down to cut and then automatically retracts the blade when not in use. The cutting depth is adjusted with a thumb screw requiring no tools.
Reader Service No. 180 • freeproductinfo.net/rer
Diamond Products
Diamond Products introduces the SpeediCut Jr. cut-off saws to its product line. The 14-inch maximum blade capacity saw weights 22 pounds and is designed for professional concrete contractors. The SpeediCut Jr. saw includes a 4.8-hp Hemi engine, 3-stage filtration system, and features low emissions and strong fuel economy with reduced noise emissions.
Reader Service No. 181 • freeproductinfo.net/rer
MK Diamond
MK Diamond introduces the MK-3000 concrete saw that offers operators a compact size and is lightweight for easy maneuverability. The 650-pound MK-3000 is powered by a 35-hp air-cooled V-twin Briggs & Stratton powerplant, and utilizes a manual depth feed. Two blade configurations are available: a 24-inch blade guard provides up to a 9.5-inch depth of cut, and a 30-inch blade guard provides up to a 12.5-inch depth of cut. Both models include heavy-duty blade shaft bearings that are designed to provide long service life combined with easy access and maintenance.
Reader Service No. 182 • freeproductinfo.net/rer
Chicago Pneumatic Construction Tools
Chicago Pneumatic offers the CP 0044 saw that provides a pneumatic-powered solution for cutting heavy-duty materials such as concrete, asphalt and stone. The 28-pound CP 0044 features a direct-drive, 4-hp motor and operates at 4,800 rpm. Requiring 43 cfm of air, the unit is designed for cutting in hazardous areas where the use of gas-powered tools is restricted. Available with 12- and 14-inch-diameter cutting blades, the saw provides a cutting depth of 4 inches. For additional safety, the unit includes a standard lock-off trigger that helps prevent accidental starting.
Reader Service No. 183 • freeproductinfo.net/rer
Bosch Power Tools and Accessories
For efficient dust removal and collection in masonry-cutting applications, Bosch's DC-Series attachments are designed to keep jobsites dust-free. Featuring a large, stable footplate and fast single-screw depth adjustment, the attachments allow for a full depth of cut and improved line-of-sight in precision concrete-cutting applications. Compatible with all Bosch one-touch guard system 4½- to 7-inch angle grinders, the attachments install tool-free for use in both cut-off and surfacing applications.
Reader Service No. 184 • freeproductinfo.net/rer
Atlas Copco Construction Tools
Designed for a variety of applications, Atlas Copco's hydraulic-powered cut-off saws cut through a wide range of materials, including concrete, asphalt, cement, brick and steel. The 14-inch blade on the LS 14 provides a cutting depth of 5.3 inches, while the 16-inch LS 16 offers a cutting depth of 6.3 inches. These units feature a power-on-demand system that automatically decreases the pack's engine speed when a tool is disengaged, reducing fuel consumption and extending the life of the power pack. Standard features include a hose to deliver water to a diamond blade for wet cutting and a 6.6-foot hydraulic twin-whip hose with flat-face, quick-release couplings for easy connection to the power pack hose or to an extension hose.
Reader Service No. 185 • freeproductinfo.net/rer
Stone Construction Equipment
Stone Construction Equipment introduces a line of masonry block saws — the Stone Saw Devil MS1 (pictured) and MS2. The MS1 is a lightweight portable block saw, while the MS2 is a heavy-duty professional block saw. Both models are offered with a variety of engine and blade guard options. The MS1 cuts blocks to 5-inch depths with a 14-inch blade capacity, while the MS2 cuts blocks to an 8-inch depth with a 20-inch blade capacity.
Reader Service No. 186 • freeproductinfo.net/rer
Shindaiwa
Shindaiwa introduces two professional-grade engine cut-off saws. The EC7500 is designed for a 12-inch wheel capacity, and the EC7600 (pictured) is designed for a 14-inch wheel capacity. The saws are powered by a 73.5-cc displacement, 4.5-hp engine and feature a high-torque-designed transmission for improved cutting performance. Operators can rotate the drivetrain from standard incline cutting to flush cutting. To reduce operator fatigue and vibration on the hands, an ergonomically designed front handle and full 6-point anti-vibe system come standard.
Reader Service No. 187 • freeproductinfo.net/rer
