March 1, 2001
TILE/PAVER SAW The Stow TP-10 can be used for precision cutting of tile, marble, granite and brick pavers. Powered by a 1.5-horsepower electric motor,


The Stow TP-10 can be used for precision cutting of tile, marble, granite and brick pavers. Powered by a 1.5-horsepower electric motor, the unit has a blade capacity ranging from 7 to 10 inches. A 10-inch blade is standard. The unit can rip a 24-inch tile in a single pass and cut an 18-inch tile diagonally, the company says.


Designed for small projects, Barreto's 918 tiller features narrow tires and an 18-inch tilling width. The 9-horsepower unit uses all-hydraulic power and does not require belts or chains. The wheel-drive motor is mounted inside the tiller body, increasing ground clearance.


General Pipe Cleaners' Super-Vee drain cleaner can unclog sink, shower, toilet and laundry lines up to 3 inches in diameter. According to the manufacturer, the unit is equipped with a slide-action chuck in the front handle grip to engage and release the cable with a quick push or pull, even while the cable is rotating. The chuck adjusts to accept 1/4 inch- to 3/8 inch-diameter Flexicore cables.


The Lubemate service/lube truck body from Valley Engineering helps operators lubricate equipment at the job site. Features include enclosed reels and pumps as well as components such as compressors, air-operated parts washers, greasers, pressure washers or generators.


JLG's new Large Electric (LE) Series of scissor lifts includes the 3369LE (pictured) and 4069LE. The indoor/outdoor units feature nonmarking tires, a 3-foot platform extension, rechargeable 370-amp-hour batteries, zero emissions, automatic traction control, an oscillating axle and all-terrain tread. The 3369LE has a 33-foot platform height and a 1,000-pound platform capacity. The larger 4069LE has a 40-foot platform height and an 800-pound capacity. Options include all-wheel drive and leveling jacks.


The Solar 170LC-V, a new addition to Daewoo's Solar-V line, is a midsize, street-legal excavator that fits on a 20-ton trailer. Powered by a 116-horsepower Daewoo DB 58T engine, the unit has a breakout force of 23,589 pounds. Features include joystick control and centralized lube points. The multipurpose excavator is ideal for backfilling, grading and leveling, the company says.


The Ditch Witch JT4020 Mach 1 horizontal directional drilling system from Charles Machine Works is a track-mounted, self-contained unit. Powered by a 185-horsepower diesel engine, the system produces 40,000 pounds of pullback, 5,000 foot-pounds of spindle torque and spindle speeds up to 250 rpm. New features include simplified electronics with an on-board controller; cruise control that lets the operator set drilling and backreaming speeds; four-point anchoring to hold the unit in place; automated pipe loading and unloading; and a larger-capacity lubricating system.


The Delta II dual head grinder smoothes concrete and removes surface coatings, adhesives and other debris. The unit's tulip or triangle design lets the discs overlap, preventing a void between discs and providing full 19-inch coverage. The floating head system follows the floor's contour for even grinding, and adjustable rear wheels ensure even wear, according to Sinclair Equipment. The engagement lever lets operators lift the grinding heads off the floor to ease operation.


The portable KL350-OP-TU welding system from Uniweld includes an oxygen regulator, an acetylene regulator, a cutting attachment, a welding handle, a cutting tip, a welding tip, a 12.5-foot twin hose set, 10 cubic feet of acetylene cylinder, 20 cubic feet of oxygen cylinder, a tip cleaner, goggles, a wrench and a carrying tote. When full, the cylinders provide about 30 minutes of cutting and welding time, and they can be replaced when empty. Cutting tips also can be replaced to maximize cutting quality. The unit weighs 37 pounds.


My-te Products designed the AC36 winch-hoist to move motors and other heavy equipment. The electric unit features a 3,000-pound single-line or 6,000-pound double-line lift capacity and can drag 24,000 pounds, the company says.


The LW50, the smallest in New Holland's line of wheel loaders, has a 50-horsepower Perkins engine and a breakout force of 10,575 pounds. Additional features include all-wheel drive, an oscillating rear axle, a hydraulic quick coupler, a hydrostatic transmission, and two forward and two reverse speeds.


The new YTM1015 tile saw from Pro-Cut Products, a division of Norton, features a steel tubular frame, a cast-aluminum blade guard, a stainless steel water pan, a vertically adjustable cutting head and the option of using 6- to 10-inch diamond blades. The unit makes straight cuts up to 20 inches and diagonal cuts up to 14 inches, the manufacturer says.


MQ Power's DAW-500S delivers up to 500 amps of DC welding power and 3,000 watts of AC power for operating tools and lights. Ideal for wire-feed welding applications, the unit can accommodate simultaneous operation of the welder and the generator and can be used by multiple operators at once. The unit features a brushless permanent magnet generator, a Kubota engine, a 72-decibel noise level, an automatic safety shutdown system, a self-priming fuel system and full instrumentation.


The CR Series power rake from Billy Goat Industries is a compact, lightweight unit that combines all the qualities and features of the PR Series, the company says. It features a steel deck, heat-treated and tempered flail knives, and pillow block bearings. The unit's construction facilitates changeover between the flail reel and the slicing reel and is designed to reduce noise, vibration and maintenance.


Rogers Bros.' TAG Series trailers are available in 10- to 25-ton capacities. Each model features a 24-foot loading area, a unitized frame and spring suspension. Options include a covered toolbox, spring parking brakes, disc wheels, slip hooks with safety latches and a backup warning alarm.


Genie's newest self-propelled aerial work platform, the Runabout, is 29.5 inches wide and 53 inches long and can fit through any doorway and in most elevators, the company says. Three models are available, with platform heights (in feet) respective to their model numbers: the GR-8, GR-12 (pictured) and GR-15. Each work platform features a 19-inch entry height and is available with an optional deck extension that provides nearly 2 feet of horizontal outreach. Each model features a 6-inch turning radius, high-torque wheel motors, hydraulic-released disc brakes and a 2.5-mph drive speed.


The Water Shotgun II 3000 CHS cold-water, gasoline-powered pressure washer from Alto Simpson Technology has an 11-horsepower Honda overhead valve engine and delivers 3.5 gallons per minute at 3,000 pounds per square inch. The unit features a triplex Cat pump and Simpson's Millennium unloader valve, designed to make pulling the trigger easier.


Bil-Jax's scaffold user and maintenance video explains proper methods for setting up fixed and rolling scaffold towers and maintenance guidelines for scaffold components. The video is designed to educate employees and customers of the safety issues involved in erecting scaffolding.


Lull's concrete hopper attachment pours concrete in hard-to-reach locations quickly and accurately, the company says. The 550-pound unit features a .75-cubic-foot capacity and a hydraulic gate that controls discharge. The unit attaches to all Lull telescopic handlers and other manufacturers' models.


Mi-T-M offers two new industrial wet/dry vacuums: the 13-gallon MV-1300-OMEV and the 18-gallon MV-1800-OMEV. Each unit features a 120-volt single-stage bypass motor, 25 feet of electrical cord, a 10-foot hose with swivel, a chrome wand, a drain hose, a 14-inch wet/dry floor tool, and a wet and dry cartridge filter. The MV-1300-OMEV has a 1.3-horsepower motor, a suction rate of 115 cubic feet per minute, a water recovery of 9 gallons and a water lift of 7.75 feet. The MV-1800-OMEV has a 1.6-horsepower motor, a suction rate of 120 cfm, a water recovery of 13 gallons and a water lift of 8 feet.