Diamond Products
Diamond Products introduces its 14-inch blade capacity SpeediCut-XL cut-off saw, a high-speed saw for cutting concrete, block, brick and asphalt. The unit has a larger initial foam filter and redirected air flow against secondary filter to optimize air filtration. An enhanced version of the previous SpeediCut 14-inch saw, the unit optimizes cooling from air flow and the fuel compensator to reduce cylinder temperature. An enhanced catalytic muffler reduces emissions and temperature.
Reader Service No. 150 • freeproductinfo.net/rer
Stone Construction Equipment
The Stone Screed Bull from Stone Construction Equipment has two models of vibrating power screeds. The VSB80, the heavy-duty professional contractors' model, handles boards to 16 feet yet weighs only 32 pounds. The VSB70 is a more lightweight line and handles 12-foot boards and weighs only 25 pounds. The power nits drive the extruded aluminum screed boards with an equilateral triangle geometry with additional reinforcing, generating dual horizontal and vertical vibration. Both models are powered by 4-cycle Honda GX25 engines, and feature handle-mounted throttles for fingertip control of the vibration.
Reader Service No. 151 • freeproductinfo.net/rer
Wacker Neuson
Wacker Neuson's DF rebar tier allows operators to tie up to 1,000 knots per hour, compared to 400 kph using conventional pliers. The DF 16 is designed to improve operator comfort by enabling he or she to work in an upright position. The tier creates a tighter knot and each tie is secured without cutting, eliminating costly site cleanup. Besides relieving back strain, the DF 16 eliminates the turning/twisting motion of the wrist, which can cause carpal tunnel syndrome.
Reader Service No. 152 • freeproductinfo.net/rer
Allen Engineering
Allen Engineering expands its walk-behind power trowel line with the E Series, an economical alternative to its current Pro Series. The E Series offers less weight and lower prices. The E Series is offered in both a 36-inch and 30-inch diameter rotor configuration, powered by a 5.5-hp Honda engine. The series also includes twist pitch blade adjustment and Allen's new handlebar-mounted safety kill switch.
Reader Service No. 153 • freeproductinfo.net/rer
E-Z Drill
E-Z Drill offers the Model 240B combo drill system, designed for straight-line drilling on level subgrade. With the capability of converting to a core drill, the unit is designed for rock drilling and core-drilling applications. The core drill utilizes a three-speed motor and requires a minimum of 77 cfm for operation. The standard rock drill configuration requires 100 cfm. The unit can core and drill holes from 5/8-inch diameter up to 2 ½ inches, and drill up to 18 inches deep.
Reader Service No. 154 • freeproductinfo.net/rer
Stens
Stens trowel blades are available in two sizes: 6-inch by 14-inch, and 6-inch by 18-inch. Stens combo blades — available in three sizes — can be used in float or finish positions. Float blades are also available in two sizes.
Reader Service No. 155 • freeproductinfo.net/rer
General Equipment
The SP8/G Series II surface planer from General Equipment is designed for varied applications such as milling misaligned sidewalks and joints, removing thermo and cold plastic markings and prepping floors for new coating applications. Able to be equipped with various gasoline engines, the planer is built with unitized, welded steel-plate frames and extra-capacity ball bearings. The unit has a maximum cutting depth of 5/8 inches, cutting width of 8 inches and a cutting proximity to a vertical wall of 3 ¼ inches. Cutting depth is adjusted using a screw-type, positive-locking depth selector.
Reader Service No. 156 • freeproductinfo.net/rer
Mayco, division of Multiquip
The LS series of concrete pumps from Mayco, division of Multiquip, include the LS300, the mid-range LS400 and LS500, and the heavy-duty LS600 (pictured). The units feature a digital control panel and digital readout providing diagnostics in English and Spanish, enabling the operator to quickly troubleshoot. The LS600 model is designed for low-slump footings, tough rocky mixes, hard-to-reach areas, big slabs and long-distance applications. It handles low cement/sand mixes up to 1 ½-inch aggregate and is powered by a Deutz 99-hp diesel engine.
Reader Service No. 157 • freeproductinfo.net/rer
Chicago Pneumatic
Chicago Pneumatic launches its new CP 0112, CP 0112S, and CP 0112EX handheld pneumatic breakers that offer a 15-percent increase in performance compared to the previous series, the maker says. On the CP 0112, the four-bolt backhead is designed to withstand rugged use and the integral oiler provides continuous lubrication. It is used in light demolition applications such as floors, pavement, frozen ground and masonry walls. The CP 0112 EX features an extended handle, intended for light trenching operations, while the CP 0112S is a silenced version designed for use outside North America.
Reader Service No. 158 • freeproductinfo.net/rer
M-B-W
The GPR315 model reversible plate compactor from M-B-W is designed to address the most common cause of downtime and repair in reversible plates — forward and reverse shifting mechanisms. Weighing 968 pounds, the unit features infinitely variable forward and reverse travel to about 80 feet per minute. Other features include a patented hydraulic shifting design that addresses problems with hydraulic systems. The exciter case is vented to relieve heat-related pressure and prevent shifting seal deformation and failure.
Reader Service No. 159 • freeproductinfo.net/rer
CS Unitec
CS Unitec's new Portamix Hippo PMH 70F mixing station mixes cement screeds, grout mortar, texture coatings, sealants, and other self-leveling compounds and materials. The unit is designed for one person to be able to mix, transport and pour directly onto the floor. The Easy-Roll Trolley and Easy-Tilt Cradle enable the user to pour, accurately place and spread up to 20 gallons of material at the same time. The 8-inch diameter of the mixing paddles provides an increased peripheral speed, eliminating the need for high RPM mixing and helps to prevent flash curing.
Reader Service No. 160 • freeproductinfo.net/rer
Arrow-Master
Expandable to 60 feet, Arrow-Master's gas-powered aluminum screed sections are available in 2 ½-, 5- and 7 ½-foot lengths. Weighing 8 pounds per foot, all-bolted construction facilitates onsite maintenance. The Curl Edge runner is designed to yield a more uniform concrete spread. Available with manual or hydraulic self-propelled drive, the screeds are available with Honda or Briggs & Stratton engines.
Reader Service No. 161 • freeproductinfo.net/rer
