Skip navigation


Atlas Copco Compressors

To suit the needs of rental and construction customers, Atlas Copco redesigned its low pressure and large compressors to fit in a newly designed mid-range compressor platform comprised of the XA (M, T, H, V) S 650-850 Caterpillar-driven models. With their smaller size and weight, they are designed for urban use where space constraints are a common issue. Housed in a silenced canopy, the new range complies with the latest OND sound pressure level requirements.
Circle 152 on Reply


The PAC-5 is an 8.9 cfm, 5.5-hp air compressor that will run any Edco ALR Model chisel scaler, 3 to 5 framing /sheathing guns or 4 to 7 roofing guns. The Pac-8 is a 16.2-cfm, 8-hp air compressor that can handle an Edco Big Stick model chisel scaler, a couple of ALR model chisel scalers, 6 to 8 framing/sheathing guns or 8 to 10 roofing guns. These multiple-machine usage compressors are built with an Italian-made Chinook pump, and both come with a complete gauge package and low oil shut off.
Circle 153 on Reply

Jenny Products

The K series electric wheeled portable compressors are designed to meet the needs of homeowner and professional contractor customers. The K-Series features the “K” pump, a heavy-duty, single-stage cast-iron compressor pump. The series consists of three different horsepower — 1, 1.5 and 2 — and four basic air tank configurations — 8,15,17 and 30 gallon. Operating on 115- or 230-volt, single-phase power, K-series compressors can deliver up to 8.4 cfm at 100 psi for quick recovery.
Circle 154 on Reply

Ingersoll Rand

Ingersoll Rand releases a revision to its XHP1170FCAT air compressor, which delivers the same power in a smaller footprint. The new model is less than 13 feet in length while the previous model was 15 feet, 4 inches in length. It provides a free air delivery of 1,170 cubic feet per minute. Options available on the XHP1170FCAT include a spark arrestor, battery, day fuel tank and frame isolators.
Circle 155 on Reply

Iowa Mold Tooling Co.

Dominator mechanic trucks now feature options that include the CAS2545 rotary screw air compressors, welder generator and redesigned drawer sets. The CAS2545 compressed air system is a 45-cfm hydraulically driven, rotary screw compressor with maximum operating pressure of 150 psi. The unit is a single-stage, pressure-lubricated compressor designed for mobile or industrial applications. The new compressor model provides high-volume air for use in air tools, tire service, sandblasting, painting and other compressed air needs.
Circle 156 on Reply

Kaesar Compressors

The new M50 Mobilair portable compressor delivers 185 cfm at 100 psig. Features include the power-saving Sigma Profile rotary screw airend and a heavy-duty 4-cylinder Kubota diesel engine to provide more air with less fuel. The M50's galvanized steel canopy allows quick access to all components for easy servicing and also reduces noise levels. All units also feature a cold-start battery and an instrument and lighting package.
Circle 157 on Reply


The DR-13 and DE-18 oil-free air compressors were developed specifically for the rental industry with input gathered from rental industry experts. These two models provide 100-percent oil-free air with no danger of system problems or damage to work in process. Built with fewer components, these air compressors are designed to provide reliable performance with minimal maintenance.
Circle 158 on Reply


GrimmerSchmidt introduces new options on its compressors, including a generator option that supplies additional power for equipment such as welders or grinders, and allows the compressor and the generator to be used simultaneously. Another new feature is an integrated aftercooler option. Mounted on the engine radiator, it maintains an approach temperature within 20 degrees of ambient conditions through an air-to-air heat exchange. Moisture removal is by an automatic draining separator.
Circle 159 on Reply


Three new combination air compressor/generators from Mi-T-M feature 6.5-hp/196cc displacement or 13-hp/389cc displacement Honda OHV engines; industrial 1800- or 3500-watt generators; single- or two-stage compressors; 14-gauge powder-coated two-piece belt guard; powder-coated 8-gallon twin tank receivers; regulator and two gauges for tank and outlet pressure; and manual drain valves for proper maintenance. The units are designed for industrial applications that require electrical power and air.
Circle 160 on Reply

TAGS: Ar Generators Mag
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.