Concrete & Masonry Saws Product Spotlight

Husqvarna

The new K 3000 Wet is an electric power cutter that allows the user to cut indoors easily and cost-effectively, without dust. Equipped with a newly developed wet-cutting kit that regulates the flow of water and concentrates the spray into a stream and then onto the blade, the K 3000 houses specially designed nozzles in specific positions along the blade guard to help keep water flow use to a minimum.
Reader Service No. 152 • freeproductinfo.net/rer

Stone Construction Equipment

The Stone Saw Devil MS1 and MS2 masonry block saws are offered with a variety of engine and blade guard options. All-steel frames, sealed bearings and stationary engine platforms are designed to stand up to complicated block cutting. The saws also feature cast aluminum cutting cards with nylon wheels and non-slip rubber tops; an open-back design to allow rip cutting the entire length of larger blocks; an easy-to-clean polyethylene blade guard that provides 210 degrees of blade coverage; and stay-level blade guards with full blade clamp coverage to keep the blade parallel to the cutting surface.
Reader Service No. 153 • freeproductinfo.net/rer

Hilti

The Hilti DCH 230 and DCH 300 electric diamond cutters feature a 2.6-kw motor and cutting depth adjustment mechanism. Designed exclusively for cutting, the DCH 230 and DCH 300 are suited for rental because they feature an intelligent electronic control system that constantly regulates motor power to suit the material being cut and the pressure applied to the tool. Applications include the thickest materials such as reinforced concrete, granite curbstones, slabs, bricks, metal beams, steel pipes and more.
Reader Service No. 154 • freeproductinfo.net/rer

Chicago Pneumatic Construction Tools

The SAW 16 model (pictured) hydraulic-powered cut-off saw features a 16-inch blade and cuts to a depth of 6.3 inches, while the SAW 14 has a 14-inch blade with a maximum cutting depth of 5.2 inches. The saws feature a simple direct-drive configuration that provides consistent speed and torque during use. The design also minimizes overall maintenance requirements, especially when compared with belt-driven saws. An open cutting face simplifies use in even the most difficult conditions, and the saws are engineered to be versatile enough for demolition, underwater repairs and utility maintenance work.
Reader Service No. 155 • freeproductinfo.net/rer

Diamond Products

The new Core Cut CC150-EE early-entry walk-behind saw features a 4.8-hp Honda GX-160 engine and a patent-pending skid plate adjustment mechanism designed to last the life of several blades. With no need for adapters, the CC150-EE uses a 6-inch blade with 1-inch arbor, a mechanical blade depth control, and a 1 3/16-inch cutting depth. The saw also features two front polyurethane, non-marking wheels for greater stability.
Reader Service No. 156 • freeproductinfo.net/rer

Wacker Neuson

Wacker Neuson's walk-behind saws are designed for better cutting performance, easy operation, longer life and reduced maintenance. The engine is placed forward on the unit, directly over the cutting area, to better distribute the majority of the machine's weight, allowing it to pull the saw forward with less effort and provide straighter, more stable and faster cuts. A long-life, state-of-the-art poly V-belt provides direct power transmission from the engine to the cutting shaft. Double-sealed bearings keep concrete and dust out, reducing maintenance and prolonging the life of the bearings.
Reader Service No. 157 • freeproductinfo.net/rer

Doosan Infracore Portable Power

The WS Series concrete saws offer cutting depths from 4.6 to 15 inches with 12- to 36-inch blades. The WS Series saws are designed for contraction and expansion joints, cuts for utility installations, patch repairs in asphalt and concrete, short-run slab cutting, trenching and traffic loop installation. The heavy-duty, 7-gauge steel frame on the WS Series concrete saws provides a solid platform, reducing vibration for straighter, faster cuts. A sturdy frame extends the life of the blade. The WS Series is built with steel splashguards to enhance safety by keeping slurry and material fragments away from the operator.
Reader Service No. 159 • freeproductinfo.net/rer

CS Unitec

CS Unitec introduces a pneumatic concrete chain saw with a new AirFORCE F4 diamond chain to meet the need for cutting up to 15 inches deep in concrete. Designed for cutting reinforced concrete, brick, block, concrete pipe and natural stone, the CS 536163-2 air saw plunge cuts up to 15 inches deep in one pass, and quickly cuts mechanical openings, irregular shapes and square corners up to 14 inches with no overcuts. Its 6.5-hp air motor has a no-load speed of 5700 rpm. The saw can be used hand-held or with the optional SpeedHook guide to make straight cuts through walls and other surfaces.
Reader Service No. 158 • freeproductinfo.net/rer

MK Diamond

MK Diamond introduces a new line of large, electric-powered concrete saws, designed to provide a solution for those environments where electric power is preferred over gas power. The MK-3000 saw series utilizes totally enclosed fan-cooled Baldor motors with an IP65 IEC across-the-line starter switch. The series also utilizes a three-phase motor that can be set up for 230-volt or 460-volt to match the user's needs. These self-propelled saws are available with 24-inch and 30-inch blade guards.
Reader Service No. 160 • freeproductinfo.net/rer

Edco

The DS-18 concrete and asphalt saw features a 13-hp gasoline engine or 5-hp electric motor with a heavy-duty, anti-vibration engine mount; a 7-gauge, solid-steel frame; 18-inch blade capacity with dual-arbor cutting along with lifting handles; a lifting bail; and balance, which is key to performance, long blade life, smooth, even cuts and eliminates excessive wear and tear on the machine.
Reader Service No. 161 • freeproductinfo.net/rer

Stens Corp.

Stens Corp. offers a broad selection of replacement parts for cut-off saws. Users can choose from a wide variety of air filters, spark plugs, starter rope, cylinder assemblies and belts. The selection includes replacement parts for Stihl, Makita, Wacker Neuson, Dolmar, Partner and Husqvarna. Stens also carries a number of air filter kits, which include air filter, pre filter and inner filter, where applicable, and are conveniently packaged in a display-ready clamshell.
Reader Service No. 162 • freeproductinfo.net/rer