The DLW300ESA welder from Multiquip features constant current and constant voltage, delivering up to 300 amps of DC welding power and providing up to 10.5kW of 120/240-volt AC power. The welder includes thermal overload, water and oil level shut-downs. Multiple electric AC outlets for operator convenience come standard as does a brushless alternator design to lower maintenance requirements, and a self-priming fuel system for instant restarts.
Reader Service No. 180 • freeproductinfo.net/rer
The Mi-T-M Model AM2-PY09-30M generator and portable air compressor features 30 gallons of air storage capacity and a 9-hp Yanmar diesel engine. The compressor pump consists of a splash-lubricated cast-iron crankcase, an aluminum head for heat dissipation, a cast-iron cylinder and a large canister intake filter. The unit weighs 430 pounds and comes equipped with a convenient lifting handle as well as two pneumatic tires with tubes and steel hubs.
Reader Service No. 181 • freeproductinfo.net/rer
Subaru introduces a new line of diesel generators powered by Hatz 4-cycle, single-cylinder diesel engines. The RGD3300H uses a 6.8-hp Hatz 1B30 engine with a rate output of 3,000 watts, while the larger RGD5000H (pictured) uses a 9.9-hp Hatz 1B40 for a rated output of 5,000 watts. Both models have electric starters with recoil backup, while GFCI receptacles and fuseless circuit breakers protect the current level. Both models also include a full-power switch, voltmeter and 12-volt DC charging, as well as a spark arrestor that lessens both noise and ignition risk. Large 4.4-gallon fuel tanks allow for hours of continuous operation, while a low-oil shutdown system prevents damage to the engine should lubrication levels drop.
Reader Service No. 182 • freeproductinfo.net/rer
The Champion 10,000 welder/generator from Hobart Welding Products is powered by a 20-hp twin-cycle Kohler engine or a 22-hp Subaru engine. The unit produces 10,000 watts of peak auxiliary power and a 210-amp constant current, as well as a DC weld output at 60-percent duty cycle. It can run for up to 9 hours on one 10-gallon tank of gas under a steady load of 4,000 watts. The Champion 10,000 features Hobart's patented Field Current Control technology for smooth stick arc starts with minimal sticking of the rod.
Reader Service No. 183 • freeproductinfo.net/rer
Magnum Products introduces the MLT 4250 combination light tower and generator, which provides power generation ranging from single-phase prime 15 kW to three-phase prime 18 kW. The unit also produces 440,000 lumens of light, enough to illuminate up to 7 jobsite acres and has a fuel capacity sufficient to run more than 24 hours. The microprocessor controller simplifies operation with LED indicator lights, metering displays and seven engine safety warnings and shutdowns. A four-point outrigger/jack support stance assures maximum unit stability on rugged construction sites. The tubular-steel mast can extend up to 30 feet and has a 360-degree rotation with a locking system.
Reader Service No. 184 • freeproductinfo.net/rer
The 1,000 kW Rental Power unit from Cummins Power Generation is certified to meet EPA Tier-2 emissions standards and features low emissions, increased running time, selectable voltages and easy operator access for maintainability. It provides temporary power for construction and emergency power for commercial buildings, industrial plants and public works facilities. The trailerized unit comes equipped with an easy-to-operate customer interface designed to minimize setup. The unit's enclosure features 110-percent fluid containment to prevent jobsite contamination from fuel leaks or spills.
Reader Service No. 185 • freeproductinfo.net/rer
Doosan Infracore Portable Power
Doosan Infracore Portable Power offers Ingersoll Rand PowerSource, which is a line of mobile generators ranging from 10 kVA to 83 kVA. The footprint on the six PowerSource generators (G10 to G80 models) has been reduced by up to 30 percent from previous models. Despite a lightweight and compact design, the generators boast low noise signatures, making these units suited for night work and other noise-sensitive applications. The high-capacity fuel tank, sized for 24-hour operation, is mounted within the containment basin, providing double-wall protection for the fuel system.
Reader Service No. 186 • freeproductinfo.net/rer
Honda Power Equipment
All EB Series Honda generators come standard with full generator GFCI circuit protection for OSHA-regulated jobsites. The EB3800, EB5000 and EB6500 models use a Honda commercial-grade overhead-valve engine. This quiet, four-stroke engine, acoustically tuned muffler and airflow systems boast low decibel levels. These models feature a 6.6-gallon fuel tank, easy-access outlet panel, an additional duplex outlet and an oil alert. They also come standard with a wheel kit for easy transport and a hanger kit for lifting units with cranes and securing units left on jobsites overnight.
Reader Service No. 187 • freeproductinfo.net/rer
Atlas Copco Compressors
The QAS 150 generator from Atlas Copco features a rugged Zincor steel-coated canopy designed for extreme weather conditions. It is mounted on rugged skids for ease of transportation, and a standard-sealed spillage-free frame ensures that all fluid can be retained within the frame. The generator houses a 6-cylinder John Deere engine and can power a wider variety of critical applications with its standard 24-hour fuel tank that allows for versatility.
Reader Service No. 188 • freeproductinfo.net/rer
Terex introduces the T360 Super Quiet generator, powered by a heavy-duty, 426-hp Cummins diesel engine and offers Tier-3 compliance to meet the latest environmental standards. The T360 offers 288 kW of prime electrical output to provide operators the flexibility to power loads such as powering large tower cranes and pumps, or providing temporary power during electrical substation maintenance. The unit comes standard with the company's Permanent Magnet Generator that provides a quicker response to changes in load, resulting in better voltage regulation for motor starting and non-linear loads. The fuel capacity offers operators 24 hours of continuous operation on one tank of fuel.
Reader Service No. 189 • freeproductinfo.net/rer
DeWalt announces its new line of generators — DG3000, DG4400B, DG6300B and DG7000B (pictured) — designed with a CARB-compliant DeWalt commercial-grade engine, 18-volt cordless battery start and increased surge capacity. The DG4400B, DG6300B and DG7000B are equipped with a cordless battery start option, which is reliable in all weather conditions and provides greater flexibility on the jobsite, according to the manufacturer. Each generator is also built with a heavy-duty lifting hook for secure storage and easy transport on the jobsite.
Reader Service No. 190 • freeproductinfo.net/rer
Bernard Welding Equipment's Dura-Flux self-shielded flux-cored welding gun can now be configured with direct plugs for wire feeders outfitted with Tweco 4 and Euro gun connections. Direct-plug replacement kits make Dura-Flux direct plugs easily interchangeable, allowing companies with several brands of feeders to move the Dura-Flux from one brand of feeder to another simply by switching the direct plug and trigger cord adapter. The Dura-Flux is rated to 350 amps at 60-percent duty cycle and can handle higher current loads at reduced duty cycles. It accepts flux-cored wire up to 3/32-inch and is equipped with a heavy-duty monocoil power cable.
Reader Service No. 191 • freeproductinfo.net/rer
Yanmar introduces the diesel-driven YDG Series that consists of YDG2700, YDG3700 and YDG5500. The YDG2700 is the smallest unit measuring 25.6 by 16.4 by 19.7 inches and weighs 141 pounds with an output of 2.5 kW. The mid-size YDG3700 measures 25.6 by 19.5 by 20.9 inches and weighs 181 pounds. This unit also has an output of 3.7 kW. The YDG550 (pictured) is the largest unit in this series of generators and measures 28.3 by 18.9 by 22.8 inches with a weight of 243 pounds. All three power plants are designed for a maximum engine speed of 3,600 rpm and operate at a decibel rating of 92, 93 and 96 respectively.
Reader Service No. 192 • freeproductinfo.net/rer
The Pro 300 diesel welding generator from Miller Electric features improved reliability through fewer and more robust electronic components. An optional 4-cylinder, 24-hp Deutz engine provides power for using larger electrodes and gouging with carbons up to ¼-inch diameter. Designed for construction fleets, small contractors and pipe-welding applications, the Pro 300 provides 20 to 410 amps of welding power, as well as 12,000 watts of peak generator power. The unit also features a low-fuel shutdown function that shuts down the engine before fuel runs out.
Reader Service No. 193 • freeproductinfo.net/rer
Designed for general contractors and maintenance work, Lincoln Electric's Ranger 250 GXT provides extra performance, power and protection for professionals looking for an AC/DC welder partnered with a powerful AC auxiliary power generator. The Ranger 250 GXT has a 250-amp welding output for stick, TIG, MIG and flux-cored welding, as well as arc gouging with up to 3/16-inch carbons. Its smooth welding output provides improved welding capability, and the unit's remote control capabilities allow for the addition of a foot or hand remote control current.
Reader Service No. 194 • freeproductinfo.net/rer
Wacker Neuson introduces the GP 2600 and GP 4000 (pictured) portable generators that allow users to start larger tools as well as run a broader range of voltage-sensitive tools through improved motor starting and voltage regulation. The GP 2600 is powered by a 6-hp Wacker engine and the GP 4000 is powered by a 9-hp Wacker engine. The GP 4000 offers features such as full GFCI personal protection on all receptacles including 240-volt twist lock and a time-delay system on its auto-idle control, which eliminates the rapid cycling in and out of the auto idle due to intermittent loads.
Reader Service No. 195 • freeproductinfo.net/rer
Shindaiwa Construction Products introduces Simul-Phase Technology that allows the simultaneous use of dual-voltage single-phase and three-phase current. This technology will be first introduced on the kWiet Power model DGK25C, a 20-kW mobile generator powered by a quiet Isuzu diesel engine. Simul-Phase technology will eventually be incorporated into the entire kWiet Power lineup from 20 kW to 120 kW. Users will be able to have 120/240-volt power for lights, air conditioners and electric tools, and at the same time supply three-phase 240/480 volt power for motors driving compressors and pumps.
Reader Service No. 196 • freeproductinfo.net/rer
Baldor Electric offers generators ranging from 1 to 2,000 kW. Each generator, stock or custom, is designed to NEMA, NFPA110, CSA and UL standards. The generator products include industrial portables from 3 to 11 kW, towables from 20 to 400 kW and diesel-engine-powered gensets. Baldor also offers a mobile light tower, Model PL6000K, which features 4,000 watts of light to provide light coverage for 5 to 7 acres, and a 50-gallon diesel fuel tank provides for 100 hours of operation.
Reader Service No. 197 • freeproductinfo.net/rer