Bobcat
Two new telescopic tool carriers, the VersaHandler TTC V723 and V723 FL, have a rated load capacity of 7,000 pounds and a maximum lift height of 23 feet. The multi-purpose machines use a light, rigid frame for better stability and reduced flex, which allow them to lift as much as heavier machines in their class. Both models feature heavy-duty hydrostatic ground drive for shifting-on-the-fly between high and low drive speed ranges. The VersaHandlers have dynamic braking, allowing for controlled movement while inching up or down slopes on the jobsite, and automotive-style transmission. The tool carriers also feature three steering modes: all-wheel steer, front-wheel steer and crab steer.
Circle 177 on Reply Card ▸ freeproductinfo.net/rer
Genie
Genie's Z-135/70 articulating boom provides a maximum working height of 141 feet, horizontal outreach of 69 feet, 9 inches, and up-and-over clearance of 75 feet, 6 inches. The Z-135/70 features Genie's new X-Chassis axle configuration, which has revolutionized the mechanism for extending and retracting axles. The new Jib-eXtend jib provides access by extending the platform from a stowed length of 12 feet to a fully extended length of 20 feet. Key standard features include full traction 4WD, foam-filled tires, 4-wheel steer system with four steering modes, the ALC 1000 control system, drive enable, full onboard diagnostics, fully proportional joystick controls with simultaneous multifunction operation, an 8-foot self-leveling steel platform, 360-degree continuous turntable rotation and a foot switch time out.
Circle 179 on Reply Card ▸ freeproductinfo.net/rer
Skyjack
The Skyjack midsize rough terrain aerial work platforms have working heights of up to 56 feet and capacities up to 1,500 pounds. The midsize RT's, with a choice of engines from a liquid-cooled dual fuel to efficient diesel, power up for any jobsite environment. All models come equipped with a proportional joystick control designed to prevent inadvertent operation, an important benefit to a multi-user work force. Standard features include rear-loading gate, tilt alarm with drive/lift cut-off, 110V GFI protected AC outlet on the platform and grip lug air-filled tires. Safety features include a scissor design that maximizes rigidity and stability, promoting increased work productivity, lift relief valve that limits capacities, manual lowering valve and all-motion audible alarm.
Tom Beraldo, vice president operations for Venetor Equipment Rental, a Hamilton, Ontario-based rental company, says customers use Skyjack's SJ7027 RT scissors for applications that involve rough terrain or when a larger deck space is needed for materials to be elevated. “Skyjack has designed a product that is user-friendly both from a service technician and user's standpoint,” he says. “Parts are interchangeable amongst various models and easily accessible.”
Circle 180 on Reply Card ▸ freeproductinfo.net/rer
JLG Industries
JLG introduces two trailer-mounted boom lifts with large working envelopes and towing speeds of up to 65 mph. They feature self-leveling hydraulic outriggers and a removable platform control box with simplified one-handed proportional controls. Model T350 has a 35-foot platform height with 20-foot horizontal reach and Model T500J has a 50-foot platform height that includes a 3-foot, 6-inch jib boom with 130-degree vertical motion and has 31-foot horizontal reach. Both machines feature 370-degree non-continuous turntable rotation and have 500 pounds unrestricted capacity in their 30-by-48-inch aluminum platform. Other standard features on both models include surge brakes, parking brakes, an hour meter, tilt alarm and a 110V-AC receptacle in the platform.
Circle 182 on Reply Card ▸ freeproductinfo.net/rer
Ingersoll-Rand
The Ingersoll-Rand VR-1056C lift-and-place telehandler has a 10,000-pound capacity and a 56-foot, 2-inch lift height. Frame-mounted stabilizers allow frame leveling after deployment, and an EZ-lock rear axle stabilization system allows full machine functionality after deployment. The VR-1056C weighs 31,500 pounds and has a 3-speed Powershift drive system.
Circle 183 on Reply Card ▸ freeproductinfo.net/rer
Flannegan Western
New for the Flannegan Western sign truck is the optional FW traversing lift platform that attaches to all three of FW's optional platform lifts. The traversing lift platform's ability to move horizontally to both the right and the left sides of the truck bed allow the maintenance person to work on the median side, as well as the curb side of a road and/or one-way street. The task-oriented design of this platform adds versatility to nearly any service or sign truck.
Patrick Scanlan, highway commissioner for Oconto County, Wis., uses the FW traversing lift platform for sign repair and bulb replacement because of its flexibility. “It allows us to work on either side of the truck, which is a plus,” he says. “This gives us a little better range of motion.”
Circle 181 on Reply Card ▸ freeproductinfo.net/rer
Snorkel International
Snorkel International's electric slab scissor line features ground-to-platform heights ranging from 19 feet to 32 feet and pothole protection systems. The S1930 (pictured), S2033 and S2545 are driveable at their full heights and are designed to be easy to maintain. Consistent electric systems are designed to make these units efficient and cost effective on the jobsite. The lifts also feature 2-wheel parking brakes, level sensors and drive motion alarms.
Circle 184 on Reply Card ▸ freeproductinfo.net/rer
Beta Max
The new Max Climber 3300 transport platform hoist system from Beta Max is designed to provide an easier and safer method of lifting general building materials for the masonry, scaffolding, drywall, glazing, and restoration and renovation industries. The Max Climber 3300 features heavy-duty galvanized mast sections with a payload lifting capacity of up to 3,300 pounds. The Max Climber 3300 features an unloading ramp with side fencing and roof enclosure and certified safety brake system. The Max Climber 3300 is equipped with tandem rollers to accommodate all installations and a dual 2-speed motor drive system. It also has a heavy-gauge aluminum loading ramp and rugged basket floor with an open/close system design for easier loading and unloading.
Circle 185 on Reply Card ▸ freeproductinfo.net/rer
Carelift
With a capacity of 10,000 pounds and a lift height of 56 feet, the ZB10056 retains the same design and construction that the concrete and masonry industry has found in other Zoom Boom models. The ZB10056 also offers new features that improve job performance. Features include a new frame design and lower cab mount position to improve visibility all around the unit. In addition, the ZB10056 offers a Clark 4-speed powershift transmission, an upgraded Dana axle design resulting in a tighter turning radius and redesigned fuel and hydraulic tanks.
Circle 186 on Reply Card ▸ freeproductinfo.net/rer