High Reach Equipment

Oct. 1, 2003
Gehl The Gehl DL Series Dynalift is available with load capacities of 7,000, 8,000, 10,000 and 12,000 pounds with boom lengths of 40, 42, 44 and 55 feet.


The Gehl DL Series Dynalift is available with load capacities of 7,000, 8,000, 10,000 and 12,000 pounds with boom lengths of 40, 42, 44 and 55 feet. Models are available with either high profile or low profile boom configurations to provide maximum visibility in any working environment. The units have a 12-foot 2-inch turning radius and an overall height of 7 feet 8 inches. Each model features a rear axle stabilizer system to eliminate the need for fluid filled tires or standard outriggers.

“As an owner in the rental business you cannot afford down time, and I have found that the DL Series are virtually bulletproof,” says D. Larry Carter, president/CEO of Carter Rental, Valdosta, Ga. “If we have a problem our Gehl sales manager, Gary Randolph, and his team at the Gehl factory do everything possible to make sure our machines are up and running.”
Circle 144 on Reply Cardfreeproductinfo.net/rer


The Genie GS 1530 and GS 1930 self-propelled scissor lifts have undergone recent improvements for better performance and increased serviceability. The newly upgraded models are lighter weight and feature larger, more powerful drive motors for increased drive performance and efficiency. Maneuvering in close or tight quarters is accomplished with a more robust steering system and a zero inside turning radius. The GS-1530 reaches a working height of 21 feet and the GS-1930 has working height of 25 feet.
Circle 145 on Reply Cardfreeproductinfo.net/rer


The Putzmeister 52Z-meter truck-mounted concrete boom pump has been modified with a new TRDV 180 pedestal design. The pedestal design is modular for better serviceability, and it allows easier setup and a more simplified operation. A new optimized outrigger design now features triple-telescopic front outriggers that stow between the front axles and feature a short slewing cylinder. During setup, this allows the front outriggers to swing out within a tight 45-degree angle and then extend.
Circle 146 on Reply Cardfreeproductinfo.net/rer


UpRight revamps and expands the range of options available on its SB telescopic booms and AB articulated booms. Brand new optional packages include a welder's kit, glazer's kit and hostile environment kit. The new options will add significant scope for specialization of AB/SB machine, 46- to 80-foot platform heights.
Circle 147 on Reply Cardfreeproductinfo.net/rer


Manlift reintroduces the T40 telescopic straight boom aerial work platform, expanding its existing straight boom model range to five models from 40- to 86-foot platform height. It extends to a 40-foot platform height or 46-foot working height. The product features standard 4-wheel drive, 60-hp dual fuel or diesel power and offers users a long list of other standard features. Horizontal reach is 34 feet, providing 766 square feet of unrestricted working range.
Circle 148 on Reply Cardfreeproductinfo.net/rer

Beta Max

Beta Max introduces its new Max Climber 5700 mast climbing work platform. The product is easy to transport, the manufacturer says, and features a double tower system with a lifting capacity of up to 5,700 pounds. It has a maximum platform length of 70 feet and a maximum working height of 265 feet. Each base unit is powered by 2 by 1.5 kW motors and operates on 230V/3 phase power.
Circle 149 on Reply Cardfreeproductinfo.net/rer


The Bronto Skylift model SI 197 HDT is one of only two 197-foot boom lifts built to date. It can be safely positioned between towers in applications where there are adjacent energized circuits or there is the need to access both towers. This permits more work to be performed from a single set up. The telescoping design of the boom requires only 28 feet of overhead clearance to set up and go to work.
Circle 150 on Reply Cardfreeproductinfo.net/rer

LDC Industries

The Unilift Model 538 from LDC Industries features a telescopic boom and has a 36-foot working height. The Unilift Model 542KB articulated lift has a 42-foot working height. All Unilifts are battery powered and can be used both outdoors and indoors without the objectionable noise and fumes associated with gasoline engines. Equipped with a built-in, heavy-duty, “smart” charger, the lifts can even be plugged into any 110VAC power source while operating to keep the batteries topped off. The lifts also feature 300-pound bucket capacity, 360-degree effective coverage and standard crank-style outriggers designed to provide fast and easy setup with maximum stability.
Circle 151 on Reply Cardfreeproductinfo.net/rer


This full electric-drive vertical mast, Star 22 J, was designed to meet the needs of 28-foot working height in confined indoor areas. At a stowed height of 6 feet 5 inches, it makes it possible to pass through standard doors. With the positive/negative fly jib with a + 70/- 70-degree movement and the 9-foot 8-inch outreach, the Star 22 J allows access in the most difficult working areas. Other features include proportional hydraulic controls for precise handling and a spacious cage. Provided with battery power, the mast has long working cycles, the maker says.
Circle 152 on Reply Cardfreeproductinfo.net/rer

Bil-Jax Inc.

Bil-Jax Inc. offers hydraulic outriggers on two of its Workforce towable boom lifts. The XLB-4016, powered by a 12-volt DC battery, has a 40-foot maximum working height; 16-foot side-reach; and comes standard with 360 degrees non-continuous rotation, proportional controls, hydraulic outriggers and a 450-pound capacity platform. The XLB-4319, powered by a 24-volt DC battery or 8-hp Honda engine, offers a 43-foot maximum working height; 19-foot side-reach; and comes standard with 700 degrees non-continuous rotation, proportional controls, hydraulic outriggers, 450-pound capacity platform, hydraulic jib and 130-degree basket rotation.
Circle 153 on Reply Cardfreeproductinfo.net/rer


The AT422T is equipped with a 70-foot, full power, 3-section main boom and has a lifting capacity of 22 tons. It provides highway travel speeds and, with 4-wheel drive, the performance characteristics of a rough terrain crane for off-road use. The unit also features multiple steering modes that provide maneuverability in tight quarters. A special hydraulic circuit and hydraulic hose reel mounted on the boom allow use of a hydraulic clamshell or grapple in addition to the normal lifting functions.
Circle 154 on Reply Cardfreeproductinfo.net/rer


With 135-foot platform height, the JLG Model 1350SJP telescoping boom lift is the highest reaching self-propelled telescoping boom lift available. It incorporates the JibPlus 8-foot articulating jib boom that moves both vertically and horizontally. In its stowed configuration, the machine can be transported on a standard lowboy trailer. Advanced operating features include proportional controls, oscillating axle and 4-wheel drive.
Circle 155 on Reply Cardfreeproductinfo.net/rer


Snorkel offers the most complete line of industrial and construction aerial equipment — a whole spectrum of self-propelled articulating and telescoping booms and self-propelled scissor lifts. The aerial work platforms are designed for use on surfaces from slabs to rough terrain, working heights from 25 to 132 feet and widths from 30 inches to 8 feet 6 inches.
Circle 156 on Reply Cardfreeproductinfo.net/rer