ARDCO’s next generation Articulating Multi-Purpose Truck (AMT) features a modular back-end platform designed to accept a wide array of standard and customizable attachments. Available configurations include a bare chassis, flatbed, water tank, fuel tank, dump bed, service and lube station, and custom solutions. Multiple tire choices – tractor, construction, terra or sand – help further customize the machine. Powered by a 250-horsepower Cummins QSB6.7 Tier 4 Final diesel engine, the AMT 600 model features selectable 4- or 6-wheel-drive and offers a maximum payload of 45,000 pounds. The AMT 400 model has a 200-horsepower Cummins Tier 4 engine, offers 2- or 4-wheel-drive, and provides a max payload of 28,000 pounds.
ASV’s Posi-Track RT-30 compact track loader weighs 3,600 pounds, is 48 inches wide and has an 8.4-foot lift height. Its compact size and 10 inches of ground clearance minimize risk of damage while working in hard-to-reach areas. The single-level suspension is made up of two independent torsion axles per undercarriage, allowing for a smooth ride over every type of terrain at speeds as fast as 5.7 mph. The unit is powered by a 32.7-horsepower Perkins 1.5-liter diesel engine that produces 64.39 foot-pounds of torque. It features a rated operating capacity of 665 pounds and a tipping load of 1,900 pounds.
The Classen HSC18 Pro Sod Cutter comes in two size options — 52 inches or 55 inches long. The integrated, rear swivel wheel is designed for ease of turning and can be secured in place for straight-line cutting. The Hydro-Gear T2 hydrostatic drive transmission is designed for smooth, consistent power flow, and its power reverse assists in efficient transportation. The Pro Sod Cutter has two engine options — a 5-horsepower Honda GX160 engine or an 8-horsepower Honda GX240. The cutting blade (18-inch standard, with 12-, 16-, 20- and 24-inch options) is centered on the bottom of the machine and cuts 20 strokes per second. The cutting depth can be adjusted down to 2 1/2 inches.
Custom Equipment’s Hy-Brid Lifts self-propelled low-level scissor lifts — the HB-1030, HB-1230 and HB-1430 — feature working heights as high as 16, 18 and 20 feet, respectively. The HB-1030 can hold as much as 750 pounds, while the HB-1230 has a platform capacity of 550 pounds and the HB-1430 holds 670 pounds. The lifts can accommodate two people at a time. Platforms on the HB-1030 and HB-1430 are 25 inches wide by 60 inches long and the HB-1230 platform is 25 inches wide by 53 inches long. Each model features a 250-pound capacity, 30-inch-long slide-out extension for even greater working space.
Doosan Portable Power
The Doosan Portable Power LSC light tower features a Kubota D1005 engine. This 1,800-rpm water-cooled diesel engine meets EPA Tier 4-Final emission regulations. The power rating of the LSC is 6 kilowatts with the utilization of a high output alternator. This voltage allows operators to illuminate the unit’s four 1,000-watt metal halide floodlights or LED lamps and utilize the receptacle power function simultaneously. With the Kubota engine, the LSC has an extended service interval of 750 hours. Integrated hinges on the street-side provide easy access to the control panel and maintenance components. The LSC also features a large fuel tank for an extended runtime of 55 hours.
General Pipe Cleaners
The JM-1000 Mini-Jet is designed to quickly clear grease, sand and ice clogs from small lines, sinks, and laundry drains from 1-1/2-inch to 3-inch. The JM-1000’s water jet is designed to hit stoppages with high-pressure, wall-to-wall water spray and flush them away. Pulse helps slide the hose around tight bends and down lines. The portable, 23-pound package is contained in a rugged metal diamond plate case. Flexicore cable is designed for superior kinking resistance and strength with the right amount of flexibility. It carries a one-year warranty against breakage.
The Genie Lift Power system is available in three options: a generator-only package featuring a 3 kW hydraulic generator that supplies 120V power to the outlet in the platform for efficient operation of tools, such as grinders, drills and lights; a welder-equipped package that includes a 3-phase 12 kW generator, with the choice of a Lincoln Electric or Miller weld machine, platform-mounted fire extinguisher, fireproof sleeves over exposed hoses and wires near the platform and a welder support shelf with protective cover; or a welder-ready package designed for boom operators who already have a welding machine, equipped with a 3-phase, 12 kW hydraulically driven generator that supplies 240V 3-phase to a NEMA L15-30R platform outlet, as well as 120V single-phase power to standard single-phase outlets at the platform and at the base of the boom.
Jenny’s four wheeled-portable air compressor models feature single-stage “C” pumps and 6.5-horsepower Honda GX commercial engines. The C-series compressors deliver 9.8 CFM at 125 PSI, and are available with 8-, 15-, 17- and 30-gallon air tanks, which are powder coated and ASME certified. For maximum durability, the newly engineered “C” pumps are constructed of cast iron and are splash lubricated with Jenny “Ultimate Blue” synthetic compressor-pump oil. The pumps are belt driven with large flywheels for easy start-ups and extra cooling, and directional air shrouds help further reduce pump temperatures. Special unloading valves are also included to assist in engine starting.
Designed and constructed by Jerr-Dan based off feedback from JLG’s customers in the rental market, the 10-ton RS Carrier is a low-profile industrial carrier designed as a high-quality equipment hauling solution for the rental industry. Designed with a lower mounted bed height, it provides easy access to loaded equipment from the ground and a lower loading/unloading angle for equipment on the bed. It features full radio remote control with driver’s side control station and hydraulic manual overrides. Other features include low-maintenance slide pads and pivot joints, LED lighting and a three-year warranty standard.
The JLG three-seat 315G and six-seat 615G utility vehicles feature 10-inch ground clearance with four-wheel drive and an independent suspension to keep all four wheels on the ground during travel, delivering superior traction and balance. While in operation, drivers can shift between two-wheel and four-wheel drive, locking the differential, for improved control. Durability is further enhanced by a rugged axle, standard skid plate, brush guard bumper, heavy-duty steel frame and powder-coated paint. The units feature a 1,000-pound cargo box, a 1,500-pound towing capacity, and removable truck bed panels that accommodate a full-size skid.
The Little Wonder Optimax blower range includes eight self-propelled or push models, which feature an advanced impeller and aerodynamic design that results in 38 percent more air movement than competitive blowers, according to the OEM. Air speeds range from 143 to 179 miles per hour. The blowers’ all-steel impeller design and reverse-angled, seven-blade fan are designed for maximum airflow. Plus, the scrolled, aerodynamic air inlet maintains constant power and doesn’t clog due to intake of leaves. A large, square discharge chute rides 2 inches off of the ground, meant to yield better movement of standing water and stubborn debris.
Pettibone’s T944X Traverse telehandler is the only telescopic handler currently on the market with an extendable, traversing boom that moves loads by traveling horizontally, according to the OEM. This capability allows users to precisely and safely place loads forward through windows or other tight openings without having to reposition the machine. With the Traverse, the specified lift height is the landing height. This stands in contrast to a traditional fixed boom pivot, where the true landing height is generally several feet less than advertised, as operators must account for withdrawing the forks out of the load with enough rearward travel for the fork tips to clear the landing zone.
Volvo Construction Equipment’s newly released L25H compact wheel loader is designed to add stability, maneuverability and versatility to any rental fleet. With a comprehensive range of attachments and the SSL Attachment bracket for use with most SSL attachments, the machine is suited to a wide variety of customers.
Wacker Neuson has added an LED light option to its newest line of compact light towers. The new LED light package is available on the Kubota powered LTV6K model. It features four 240W LED lights with a life expectancy of 50,000 hours and provides improved fuel economy with up to 137 hours of run time from the 45-gallon fuel tank. The LTV6K with LED lights provides instant on/off operation with no time needed for warm up and cool down period. Three models are available. The LTV6 is offered with the choice of a 12.2 horsepower Kohler engine or a 13.1 horsepower Kubota engine.
General Pipe Cleaners
General Pipe Cleaners’ Gen-Eye POD video inspection system features an optional Wi-Fi transmitter (offered for free during the month of February in honor of The Rental Show) located inside the monitor. Operators can use the feature to send video to their tablet or smartphone to record the inspection. The compact Gen-Eye POD combines camera, reel and monitor in an all-in-one package. The full-size model features a self-leveling camera and 200 feet of Gel-Rod for troubleshooting 3-inch to 10-inch drain lines. The MINI-POD version carries 125 feet or 175 feet of push rod with a mini, self-leveling color camera small enough to troubleshoot 2-inch to 4-inch lines. A video out connection still lets you record to an external device.
JCB’s 510-42 Loadall telescopic handler features a 10,000-pound maximum lift capacity and 42-foot lift height that requires no outriggers. The 510-42 is available with a JCB EcoMAX 109-horsepower engine requiring no diesel particulate filter, or a 74-horsepower engine requiring no diesel particulate filter and no diesel engine fluid. The unit is designed for 500-hour extended service intervals and simplified maintenance procedures, with all daily checks performed at ground level. Maintenance planning is enhanced by JCB’s available LiveLink telematics system, which provides machine status information to remote devices.
Little Beaver’s Towable Hydraulic Earth Drill is designed to reduce operating weight by roughly 50 percent compared to traditional hydraulic drills and requires less than 20 pounds of force to pivot into digging position. The frame also eliminates torque for safe one-person drilling. The rig can be transported using a removable “no tools” towing hitch. Meanwhile, the towable drill’s 11-horsepower Honda engine delivers 22 percent more power than competitive models, according to the OEM. The unit’s 2,700-psi hydraulic system provides up to 300 foot-pounds of torque with an auger speed of 150 rpm.
With an operating weight of 8,250 pounds and 0.66 cubic yard bucket capacity, the LiuGong 385B has a mechanical quick coupler compatible with a wide range of attachments designed to make switching implements fast and easy. Ergonomically located controls and easy-to-read electronic displays are designed to reduce operator fatigue. Safety is enhanced by ROPS/FOPS protection and high-intensity LED light clusters front and back for maximum worksite visibility. The loader features a 72-horsepower 3.3-liter Yanmar Tier 4 Final engine and the standard open-center hydraulic system provides a flow of 79 L/min. The 385B offers a breakout force of 6,699 lbf. and a load rating of 2,300 pounds. Options include 120 L/min high-flow hydraulics for more demanding implements, 2-speed operation and a self-leveling valve to provide parallel lift. The unit’s quick coupler is compatible with industry standard work tools.
Manitowoc Cranes’ Shuttlelift SCD15 features as spacious cab, which measures nearly 5 inches wider than previous models. Other operator-focused features include a split cab door with sliding glass windows; a full LED lighting package for improved, longer-lasting visibility; and a graphical, Rated Capacity Limiter system. The SCD15 also has a storage tray and main storage box in the front center of the carrier that are suitable for storing the downhaul ball, hook block or rigging equipment. An additional storage box is located on the right-hand side of the machine for stowing smaller tools or equipment for the operator.
National Flooring Equipment
National Flooring Equipment’s 5700, all-day battery ride-on scraper is one of the company’s most powerful machines. It can work an 8- to 12-hour day on a single charge, according to the OEM. Its built-in 115-volt charging system can plug in to any outlet, and it produces no harmful fumes or hazardous by-products. Removing the 5700’s weights allows it to meet elevator weight restrictions.
SitePro’s MPF-1200 rail style pallet forks for mini skid steers and compact tool carriers are rated at 1,200 pounds. The forks are 1-inch by 3-inch by 36-inch Class I tines. The MPF-2000 utilizes 1.18-inch by 3-inch by 42-inch Class I tines mounted on a frame that is 33.25 inches wide with a rated capacity of 2,000 lbs. Both models incorporate SitePro’s universal mini mount to match most machines, including Toro Dingo, Boxer, Ditch Witch, Vermeer, Thomas, Ram Rod, and Finn.