The 2-wheel, 6,000-pound-capacity Lo Riser inclining platform trailer features a 74-inch by 11-foot, 4-inch load-carrying platform that can be hydraulically lowered to ground height. The built-in ramp allows smooth, drive-on access for quickly loading or unloading cargo or equipment. When lowered, the trailer allows a minimum 5-degree angle suited for low ground clearance or reduced gradeability vehicles. Simple operation, flexibility and enhanced safety allow one person to load and transport cargo.
Booth 4823 at The Rental Show
Circle 501 on Reply Card ▪ freeproductinfo.net/rer
Rogers introduces the Ultima and TAG Series trailers that are available in capacities of 20 to 60 tons and can handle a wide variety of construction equipment. The Ultima Series, available in 35-, 50-, 55- and 60-ton capacities, enables contractors to haul longer, wider and heavier loads while maintaining compliance with GVWR regulations. Rogers' drawbar-style TAG Series trailers are available in 20- and 25-ton capacities to accommodate a variety of loads. A gradual loading angle ensures safe, easy loading and long drawbars provide optimal weight distribution and maneuverability. Other standard features include heavy-duty landing gear, tough unitized frames, spacious oak decks, sealed beam lights and heavy-duty suspensions.
Circle 503 on Reply Card ▪ freeproductinfo.net/rer
Triple-L trailers from JLG incorporate the Power Deck hydraulic system that allows the operator to lower and raise the deck hydraulically in less than 15 seconds, ensuring that one person can handle the loading and unloading of cargo. The trailer capacities range from 2,000 to 10,000 pounds and deck sizes are as large as 6 feet by 16-feet long. Standard features include two lockable steel compartments, a quick-adjust tongue jack, heavy-duty tie-down rings, and a 12-volt system that powers the hydraulic pump used to lower and raise the deck.
Booth 1418 at The Rental Show
Circle 502 on Reply Card ▪ freeproductinfo.net/rer
The ET 7000 Escalate trailer features a drop-deck design for maximum safety and ease of loading/unloading. The trailer is designed to handle payloads of up to 7,000 pounds. With a bed size of 75 inches by 144 inches, the trailer is suited for hauling scissorlifts, skid-steer loaders, trenchers, personnel lifts and all types of powered walk-behind equipment. With a ramp grade of 6 degrees, equipment with low ground clearance can be driven on and off the trailer with ease. The ET 7000 is equipped with hydraulic surge brakes or electric brakes. Other features include tie-downs, heavy-duty powder-coated finish and a low center of gravity for easy towing.
Booths 2741 and 5305 at The Rental Show
Circle 504 on Reply Card ▪ freeproductinfo.net/rer
The Ball & Ring Hitch Lock is a universal anti-theft device that fits nearly every type of trailer using a 1 7/8-, 2- or 2 5/16-inch ball- or ring-type hitch. When in place, it secures the ball placement or ring hole, which prevents unauthorized persons from hooking up and taking the trailer.
Booth 4272 at The Rental Show
Circle 505 on Reply Card ▪ freeproductinfo.net/rer
The Bri-Mar EH 820-10 is part of the equipment hauler series and has a payload carrying capacity of 10,000 pounds. The EH 820-10 has a bed length of 20 feet and a width of 8 feet, 5 inches. The trailer features rubber-mounted LED lights, a sealed wiring harness, safety chains and 6-foot ladder ramps that have a 7,000-pound capacity. The empty trailer weighs 3,660 pounds.
Circle 506 on Reply Card ▪ freeproductinfo.net/rer
Redneck Trailer Supplies
Redneck Trailer Supplies introduces the Redline Towing Accessories series, which includes receiver hitches, drop hitches, ball mounts, locks and cargo platforms. The lightweight receivers attach to the vehicle bumper and allow the use of a ball mount to level the trailer when towing. The receiver hitches and tubs are designed for use with 2-inch ball mounts. The Redline coupler locks prevent the theft of a trailer, while hitch locks prevent removal of the ball mount. The 20-inch by 60-inch cargo platform is designed for use with 1¼- and 2-inch receiver hitches and features a mesh floor, convenient tie loops and a 500-pound carrying capacity. The powder-coat finish helps to prevent corrosion.
Circle 507 on Reply Card ▪ freeproductinfo.net/rer
The Standard trailer from U-Dump features a GVW rating of 4,000 to 14,000 pounds. The trailer bed dimensions range in measurements from 5 feet by 8 feet to 7 feet, 4 inches by 12 feet. Average deck heights reach 32 inches and the trailer also includes 4-wheel electric brakes, a heavy-duty cross cylinder and tarp hooks.
Booth 4713 at The Rental Show
Circle 508 on Reply Card ▪ freeproductinfo.net/rer
The 300A-32-G trailer from Landoll features a 16,000-pound carrying capacity and eight 9.50 by 16.5 radial tires. The loaded ground clearance measures 25 inches and the loaded deck height is 38 inches. It features a powder-coated finish, four “P” loop tie downs and a 7-degree loading angle.
Booth 1301 at The Rental Show
Circle 509 on Reply Card ▪ freeproductinfo.net/rer
The ChoreMaster heavy-duty cargo loading system quickly transforms any full-size pick-up truck into a versatile multi-purpose 3-in-1 utility vehicle. The ChoreMaster can load up to 2,000 pounds from ground level into the truck cargo box with the touch of a button. The loading system is a dump body with more than 40 cubic feet of capacity for loose material such as mulch, soil and stone.
Circle 510 on Reply Card ▪ freeproductinfo.net/rer
The Demco Model DT6000HD aluminum tilt-bed trailer features a GVWR 5,980-pound capacity. The overall trailer length is 20 feet, while the bed length is 14 feet. The maximum loading degree incline is 15 degrees. The trailer features surge brakes on all four wheels with self-adjusting uni servo brake shoes. Standard features include winches and tie-down chains, and the trailer also comes equipped with rubber-torsion axle suspension.
Booth 3563 at The Rental Show
Circle 511 on Reply Card ▪ freeproductinfo.net/rer